Schäfter + Kirchhoff

We offer fiber couplers like the laser beam couplers series 60SMS or the fiber collimators series 60FC or series 60FC-F with fine-focussing mechanism with achromatic and even apochromatic optics (corrected for 400 – 640 nm).

Coming soon: Double-Pass Acousto-Optic Modulator (AOM) All fiber-coupled, polarization-maintaining acousto-optic modulator setup for tunable frequency shifting and laser light intensity modulation.

The modular muticube™ system of Schäfter+Kirchhoff allows for integration of a variety of acousto-optical modulator setups including various laser wavelengths and RF frequency ranges.

Entire fiber port clusters with integrated modulators can be built. In addition, these setups can be combined with monitor diodes, shutters, beam splitters and other established multicube™ components. More information.

The fiber-coupled laser diode beam sources of type 51nano-S have reduced power noise (< 0.1% RMS (< 1 MHz)), reduced coherence length (≈ 300 µm) and a low speckle contrast as a result of the internal RF modulation. They are available with wavelengths from 405 nm to 1550 nm.

Anamorphic optics act one-dimensionally on the elliptical profile of the collimated beam. They can e.g. be used to adjust the larger beam diameter to the dimension of the smaller one, producing a radially symmetric beam or transform a circular beam into an elliptical one. Anamorphic beam-shaping optics type 5AN are cylinder lens systems and, therefore, can be additionally used to correct the astigmatic difference.

We offer beam delivery systems that consist of a laser beam coupler of series 60SMS, a polarization-maintaining fiber cable and a fiber collimator of series 60FC.

Schäfter+Kirchhoff offers compact, rugged and highly efficient and fully fiber-coupled opto-mechanical units for splitting fiber coupled radiation for the configurations 1 ⇾ 2 and 2 ⇾ 2.

We offer single-mode, polarization-maintaining or multimode fiber cables. PCF fiber cables and special braodband RGB fibers are also available.

Schäfter+Kirchhoff offers a wide range of fiber collimators that can be used for collimating or in reverse as an incoupler. This includes the series 60FC collimators or series 60FC-SF collimators with super fine-focussing mechanism. For large beam diameters the series 60FC-T collimators can be used with integrated TILT mechanism. Special collimators 60FC-Q with integrated quarter-wave plate or made from amagnetic titanium are also available.

High precision fiber couplers (fiber port) optimized for high pointing stability and long-term stability. Efficient coupling of ­collimated laser radiation into ­single-mode and PM fiber cables. Available as 60SMS and 60SMF version.

We offer high precision fiber couplers/laser beam couplers series 60SMS optimized for high pointing stability and long-term stability for efficient coupling of ­collimated laser radiation into ­single-mode and PM fiber cables.

We offer fiber optic components including the laser beam coupler of series 60SMS for coupling into a polarization-maintaining fiber cables, fiber collimators of series 60FC. The polarization analyzers series SK010PA are universal measurement and test systems for coupling laser beam sources into polarization-maintaining fiber cables.

We offer single-mode, polarization-maintaining or multimode fiber cables. PCF fiber cables and special braodband RGB fibers are also available.

The fiber-coupled laser diode beam sources of type 51nano-S have reduced power noise (< 0.1% RMS (< 1 MHz)), reduced coherence length (≈ 300 µm) and a low speckle contrast as a result of the internal RF modulation. They are available with wavelengths from 405 nm to 1550 nm.

The laser attenuator 48AT-0 is used for reproducible and precise reduction of the power output by the laser. The collimated laser beam is constricted by a precision ball transported by a scaled micrometer screw. The subsequent single-mode fiber coupling is used as a mode filter.

We offer single-mode, polarization-maintaining or multimode fiber cables. PCF fiber cables and special braodband RGB fibers are also available.

We offer line scan cameras with USB 3.0, GiGE or GiGE Vision interface. We also offer complete scanner systems like the corrosion inspector (measurement and evaluation of corrosion phenomena on coated test plates) or robot-guided line scan cameras.

Schäfter+Kirchhoff offers fiber port clusters, which are compact,rugged opto-mechanical units that combine two fiber-coupled sources with same wavelengths and then splits the combined radiation into multiple output fiber cables with high efficiency and variable splitting ratio.

Schäfter+Kirchhoff offer various laser diode collimators. You can select them easily using our product configurator.

Schäfter+Kirchhoff offer various laser line generators, laser focus generators or laser diode collimators. You can select them easily using our product configurator.

We offer various laser line generators with different geometries e.g. with fan angle, semi-telecentric with uniform or Gaussian intensity distribution.

We offer line scan cameras with USB 3.0, GiGE or GiGE Vision interface.

We offer line scan cameras with USB 3.0, GiGE or GiGE Vision interface. We also offer complete scanner systems like the corrosion inspector (measurement and evaluation of corrosion phenomena on coated test plates) or robot-guided line scan cameras.

Schäfter+Kirchhoff offer various laser line generators, laser focus generators or laser diode collimators. You can select them easily using our product configurator.

Compact, rugged and highly efficient opto-mechanical units for splitting/combining multiple ports and use with polarization-maintaining fiber cables.

Fiber optic components for single-mode, polarization-maintaining and multimode fiber cables from UV to IR. Including laser beam couples, fiber couplers, fiber collimators, fiber cables, multicube elements for compact and rugged fiber-optic systems, fiber port cluster, polarization analyzers and fiber-coupled laser sources.

Endlessly single-mode, optional polarization-maintaining photonic crystal fibers series PCF with Gaussian intensity profile and low-stress fiber connectors with end caps.

The Polarization Analyzers series SK010PA are universal measurement and test systems for coupling laser beam sources into polarization-maintaining fiber cables. Main features include: Determination of the state of polarization (SOP) with all four Stokes parameters, PER (Polarization extinction ratio) or degree of polarization (DOP) .

We offer polarization-maintaining fiber cables with different cut-off wavelengths and measured values for the effective fiber NA. The polarization analyzers series SK010PA are universal measurement and test systems for coupling laser beam sources into polarization-maintaining fiber cables.

We offer single-mode fiber cables with different cut-off wavelengths and measured values for the effective fiber NA.