Buyer's Guide … the one with the Encyclopedia!

Where to Buy Beam Dumps

Various kinds of beam dumps can be used for temporarily or permanently blocking a laser beam – for example, for reasons of laser safety. High-power versions are fan-cooled or water-cooled.

ELearn before you buy!
See our encyclopedia article on beam dumps!
Related article: laser safety

19 suppliers for beam dumps are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.

For making a list of those suppliers which you want to check more closely, first mark all suitable ones by clicking on the entries (making their background light gray). Then click on this button:

For documenting your supplier search, you may then print this page on paper or into a PDF document.

Suppliers with Ad Package
presenting their product descriptions
CompanyProduct Description

ACM Coatings GmbH (subsidiary of Acktar Ltd.)

Rudelsburgpromenade 20c
06628 Naumburg – Bad Kösen
Germany
de.acktar.com

E-mail:
beam dumps

Acktar's laser beam dumps increase safety and reduce the risk of laser damage by trapping the beam entered into the aperture. They fit for most beam sizes and can be used in a lab or any other optical system. They are suitable for CW and pulsed beams up to 20 W/cm2 (tested value). They are available for a wide wavelength range from EUV through VIS and up to the LWIR.

The built-in mounting suits a standard optical stand (M6 × 1.0) and can be easily held. In addition to the unique design the advantage of having Acktar’s coatings implemented into the device you get the reflectivity factor of less than 10−6.

Edmund Optics

101 East Gloucester Pike
Barrington, NJ 08007
United States
www.edmundoptics.com
E-mail:
beam dumps

Edmund Optics offers Acktar blackend laser beam traps and blocks and other kinds of beam dumps.

Partners for accuracy

Gentec Electro-Optics, Inc.

445 St-Jean-Baptiste, Suite 160
Quebec, QC
Canada G2E 5N7
beam dumps

The BD Series beam dumps are rugged and easy-to-use, simply plug the water-cooling and you’re ready to go! Like our high power HP Series, these beam dumps have a highly resistant absorber that can withstand 4 kW or even 12 kW in continuous mode. Their very large aperture of 100 mm in diameter accommodates even the largest beams.

EKSMA Optics, UAB

Mokslininku str. 11
08412 Vilnius
Lithuania
www.eksmaoptics.com

E-mail:
beam dumps

EKSMA Optics offers air-cooled or water-cooled beam dumps for blocking of CW or pulsed laser beams in 0.1 – 30 µm wavelength range.

Your company's products are not listed here? Get our ad package to enjoy that and many other benefits!
All Suppliers
From your country:

Base Lab Tool Inc

50 Storm St, Ste C
Stroudsburg, PA 18360
United States
www.baselabtools.com
E-mail:

Edmund Optics

101 East Gloucester Pike
Barrington, NJ 08007
United States
www.edmundoptics.com
E-mail:
beam dumps

Edmund Optics offers Acktar blackend laser beam traps and blocks and other kinds of beam dumps.

KENTEK Corporation

32 Broadway St.
Pittsfield, NH 03263
United States
www.kenteklaserstore.com
E-mail:

Newport Corporation

1791 Deere Avenue
Irvine, CA 92606
United States

Thorlabs

56 Sparta Avenue
Newton, NJ 07860
United States
www.thorlabs.com
E-mail:
From America:

Partners for accuracy

Gentec Electro-Optics, Inc.

445 St-Jean-Baptiste, Suite 160
Quebec, QC
Canada G2E 5N7
beam dumps

The BD Series beam dumps are rugged and easy-to-use, simply plug the water-cooling and you’re ready to go! Like our high power HP Series, these beam dumps have a highly resistant absorber that can withstand 4 kW or even 12 kW in continuous mode. Their very large aperture of 100 mm in diameter accommodates even the largest beams.

Outside America:

ACM Coatings GmbH (subsidiary of Acktar Ltd.)

Rudelsburgpromenade 20c
06628 Naumburg – Bad Kösen
Germany
de.acktar.com

E-mail:
beam dumps

Acktar's laser beam dumps increase safety and reduce the risk of laser damage by trapping the beam entered into the aperture. They fit for most beam sizes and can be used in a lab or any other optical system. They are suitable for CW and pulsed beams up to 20 W/cm2 (tested value). They are available for a wide wavelength range from EUV through VIS and up to the LWIR.

The built-in mounting suits a standard optical stand (M6 × 1.0) and can be easily held. In addition to the unique design the advantage of having Acktar’s coatings implemented into the device you get the reflectivity factor of less than 10−6.

ARGES GmbH

Werk 4
92442 Wackersdorf
Germany

CLZ Precision Optics Co., Ltd.

No. 7568 Renmin Street
Changchun, JiLin
China
www.clzoptics.com
E-mail:

EKSMA Optics, UAB

Mokslininku str. 11
08412 Vilnius
Lithuania
www.eksmaoptics.com

E-mail:
beam dumps

EKSMA Optics offers air-cooled or water-cooled beam dumps for blocking of CW or pulsed laser beams in 0.1 – 30 µm wavelength range.

FiberBridge Photonics GmbH

Hollerithallee 17
30419 Hannover
Germany
www.fiberbridge-photonics.com
E-mail:

Lahat Technologies Ltd

17 Atir Yeda Street
Kfar Saba, 4464313
Israel
lahat.com
E-mail:

Laser Components GmbH

Werner-von-Siemens-Straße 15
82140 Olching
Germany
www.lasercomponents.com
E-mail:

Lastek Pty Ltd

10 Reid St
Thebarton SA 5031
Australia

Lastronics GmbH

Winzerlaer Straße 2
07745 Jena
Germany
www.lastronics.com
E-mail:

Ophir Optronics Solutions Ltd.

Science-based Industrial Park
Har Hotzvim
P.O. Box 45021
Jerusalem 9145001
Israel

PRIMES GmbH

Max-Planck-Str. 2
64319 Pfungstadt
Germany
www.primes.de
E-mail:

STANDA Ltd.

P. O. Box 377
03012 Vilnius
Lithuania

Vision Lasertechnik für Forschung und Industrie GmbH

Lügensteinweg 27
30890 Göxe
Germany

Click on a company entry to mark it.

Product entries of suppliers having an ad package are displayed with a logo, product description and product image.

Users: if any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.

Suppliers: you can report modified data using a form, which is provided via the button "Edit profile data" on your company profile page. You can obtain our ad package for getting a much improved visibility and many more leads. (Tell your marketing people about it!)

Report additional suppliers for these products!
Report Additional Suppliers for These Products

If you are a supplier and want to be listed, please use the registration form.

An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with a link at the bottom of the supplier's profile page.

Anyone, not only suppliers themselves, can report additional suppliers. If possible, please provide a web address showing that this supplier indeed offers such products.

Company:
URL:
Comments:
Prove that you are a human being: What is 7 + 5?