Buyer's Guide > Users > Product categories > erbium-doped fiber amplifiers

Buying Erbium-doped Fiber Amplifiers

Top-level product category: icon lasers and laser amplifiers

More general product categories: fiber amplifiers

Related product category: optical fiber communication systems and devices

Erbium-doped fiber amplifiers are the most important fiber amplifiers for long-range optical fiber communications. They efficiently amplify light in the 1.5-μm wavelength region, where telecom fibers have their loss minimum, and can amplify a large number of signal channels simultaneously.

Making Good Purchase Decisions

As the most professional photonics purchasing portal, RP Photonics helps you to not only to find all relevant suppliers (not limited to our advertisers), but also to make good purchasing decisions.

NEW: Structured Decision Process

Purchasing involves a lot of responsibility. We recommend that you apply best practice by using the following structured process: Go through the following expandable sections, complete the form and finally come to a purchase decision. You can then print that to a PDF for documenting the process.

Our article on best practices for purchasing and another one explaining this tool give you valuable insights.

1. Understand the technical background

It is important to sufficiently understand the technology before buying.

Use the comprehensive learning resources of RP Photonics:

erbium-doped fiber amplifiers fiber amplifiers rare-earth-doped fibers erbium-doped laser gain media optical fiber communications "Fiber Amplifiers" "Modeling of Fiber Amplifiers and Lasers" Erbium-doped Fiber Amplifier for a Long-Wavelength Signal

If you need personal help, contact RP Photonics to get technical consultancy.

I feel that I sufficiently understand the technical background.

2. Define your requirements

It is essential to fully understand and clearly define your requirements before you buy.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying erbium-doped fiber amplifiers. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

I think that I am sufficiently informed about our requirements.

Otherwise, you will need to talk to your technical colleagues.

I consider the above list of specifications to be sufficiently complete, clear and accurate.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

Insert these criteria when creating inquiry mails to suppliers with the buttons "Get quotation".

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

3. Find suitable suppliers

We suggest three steps:

Below, you can find our list of suppliers for erbium-doped fiber amplifiers. Use the checkboxes to mark possibly suitable suppliers.
The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
Based on the results, you can finally choose a supplier that is hopefully a good enough fit.

Selected suppliers:

(none so far)

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked:

Suppliers for Erbium-doped Fiber Amplifiers

46 suppliers for erbium-doped fiber amplifiers (EDFA) are listed in the RP Photonics Buyer's Guide, out of which 7 present their product descriptions. Both manufacturers and distributors can be registered.

Suppliers with Advertising Package

presenting their product descriptions

The specialist in laser technologies

Lumibird – Quantel, Keopsys, Convergent, Continuum brands
2 rue Paul Sabatier
22300 Lannion
France