Where to Buy Fiber Lasers

The key for successful integration of ultrafast technology are robust, cost-effective systems with simple push-button operation. TOPTICA offers several products fulfilling these requirements: ultrafast fiber lasers based on erbium (Er) and ytterbium (Yb) like the FemtoFiber smart, FemtoFiber pro, FemtoFiber ultra and FemtoFiber dichro series. All these systems are based on TOPTICA FemtoFiber technology.

TOPTICA’s FemtoFiber lasers provide reliable femtosecond / picoseconds pulses based on polarization-maintaining fibers and SAM mode-locking. Different models (1560/780 nm, VIS/NIR tunable output, IR/NIR supercontinuum, short-pulse) cover a wide range of applications, e.g. nonlinear microscopy, two-photon polymerization, time-domain THz and attoscience.

Menlo Systems' femtosecond fiber lasers based on Menlo figure 9® patented laser technology are unique in regard to user-friendliness and robustness. We offer solutions for scientific research as well as laser models engineered for OEM integration. From the shortest pulses to highest average power beyond 10 Watts and pulse energy beyond 10 μJ, we have the solution for your application ranging from basic research to industrial applications in spectroscopy, quality control, and material processing.

Fiber Lasers are inherently extremely stable, robust, offer good beam quality, and can be Q-switched or mode-locked to produce high peak power, high energy, and narrow linewidths. RPMC Lasers offer a wide range of fiber lasers including femtosecond, picosecond, nanosecond, and CW versions. These offerings include OEM laser packages and modules. The wavelengths on our fiber lasers range from 515 nm to 1950 nm.

The Koheras narrow linewidth, single-frequency fiber lasers are ultra-low noise sources with longitudinal single mode and single frequency operation. The lasers are based on a DFB design ensuring robust and reliable operation and are delivered as fully integrated systems for industrial and scientific applications. Koheras offers an unprecedented low phase- and intensity noise level at Yb, Er and Tm wavelengths. It has a very high stability, and mode-hop free inherent single frequency output – even when exposed to changing environmental conditions. You can also get shot noise limited solutions for applications demanding an extra low intensity noise level.

The unique, completely passively cooled ultrafast fiber laser Aalto is perfectly suited for multiphoton applications like two-photon microscopy. The pulse durations below 50 fs lead to an increased signal-to-noise ratio and a better resolution and scan depth compared to longer pulses. The system contains of a dispersion pre-compensation module allowing the shortest pulse duration at your sample.

The ultrafast fiber laser Tidal is a high power version of the Aalto. A power level of >3 W and <50-fs pulses result in peak power values above 2 MW. The system is best suited for multiphoton applications like two-photon microscopy or high precision micro- and nano material processing. An integrated dispersion pre-compensation module allows the shortest pulse duration at your sample.

Lumibird manufactures an extensive range of mature and custom-designed optical fiber amplifiers and fiber lasers. High output powers are achieved through the use of double cladding fibers pumped by broad stripe diodes. Several varieties of pumping techniques are used each optimized for specific applications. Lumibird also develops key components for producing unique and innovative light sources.

FemtoLux 3 is a modern femtosecond fiber laser aimed for both R&D use and industrial integration. Tunable pulse duration in a range of 300 fs – 5 ps, adjustable pulse repetition rate up to 5 MHz and adjustable pulse energy up to 3 μJ allows optimization of laser parameters for the desired application. These include marking and volume structuring of transparent materials, photopolymerization, biological imaging, nonlinear microscopy and many others. To expand the scope of applications even further this laser can be equipped with a second harmonics module.

With the burst mode enabled, the FemtoLux 3 can generate bursts of pulses with energy above 10 μJ with instant burst shape control, which can significantly improve the efficiency of some processes.

Having a rigid, compact, passive air-cooled laser head and the possibility to control the laser from a wireless tablet, FemtoLux 3 can be integrated with different equipment, be it laser equipment for material micro-processing, microscopy or any other research equipment.

At FYLA we develop ultrafast fiber lasers with pulse durations in the range of nanosecond, picosecond, and femtosecond. Our lasers are used in a lot of applications, from microscopy (as two-photon microscopy, SHG, SPIM, OCT) up to characterization of the semiconductors, providing a greater level of robustness, higher lifetimes, and a cost-effective solution.