Buyer's Guide … the one with the Encyclopedia!

Users Advertisers

Buyer's Guide > Users > Product categories > fiber simulation software

Buying Fiber Simulation Software

Top-level product categories: icon calculations, software and design, icon fiber optics

Related product category: laser modeling software

Simulation software can be crucial for the rapid and efficient development of fiber optics systems and for the analysis of experienced problems. It is available for both passive and active fiber optics, addressing aspects such as beam propagation in multimode fibers, fiber amplifiers, and lasers. This software helps in optimizing designs and predicting system performance.

Making Good Purchase Decisions

As the most professional photonics purchasing portal, RP Photonics helps you to not only to find all relevant suppliers (not limited to our advertisers), but also to make good purchasing decisions.

NEW: Structured Decision Process

Purchasing involves a lot of responsibility. We recommend that you apply best practice by using the following structured process: Go through the following expandable sections, complete the form and finally come to a purchase decision. You can then print that to a PDF for documenting the process.

Our article on best practices for purchasing and another one explaining this tool give you valuable insights.

1. Understand the technical background

It is important to sufficiently understand the technology before buying.

Use the comprehensive learning resources of RP Photonics:

encyclopedia article fiber simulation software fiber optics fiber lasers fiber amplifiers ultrashort pulses modes laser modeling and simulation "Modeling of Fiber Amplifiers and Lasers" "Modeling of Pulse Amplification" Erbium-doped Fiber Amplifier for a Long-Wavelength Signal Nonlinearities in Fiber Amplifier Modeling Validating Numerical Simulation Software

If you need personal help, contact RP Photonics to get technical consultancy.

2. Define your requirements

It is essential to fully understand and clearly define your requirements before you buy.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying fiber simulation software. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

Otherwise, you will need to talk to your technical colleagues.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

3. Find suitable suppliers

We suggest three steps:

  • Below, you can find our list of suppliers for fiber simulation software. Use the checkboxes to mark possibly suitable suppliers.
  • The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
  • Based on the results, you can finally choose a supplier that is hopefully a good enough fit.

Selected suppliers:

(none so far)

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked:

Suppliers for Fiber Simulation Software

8 suppliers for fiber simulation software are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.

Suppliers with Advertising Package

presenting their product descriptions

RP Photonics AG
Bannhaldenstr. 38
8500 Frauenfeld
Switzerland
Profile page  Website  
fiber simulation software

RP Fiber Power simulation software is designed for creating and analyzing fiber devices including:

  • Fiber amplifiers
  • Fiber lasers
  • ASE sources
  • Fiber-optic data links
  • Passive devices such as multi-core fibers, tapered fibers, and fiber couplers

For simpler applications, the free RP Fiber Calculator software is available.

Product-specific web page

Your company's products are not listed here? Get our Advertising Package to enjoy that and many other benefits!

Other Suppliers

CodeSeeder KG
Austria
Profile page  Website  
CodeSScientific - Photonics
Canada
Profile page  Website  
DPM Photonics
United States
Profile page  Website  
Lumerical, Inc.
Canada
Profile page  Website  Get quotation
Optiwave Systems Inc.
Canada
Profile page  Website  Get quotation
Photon Design
United Kingdom
Profile page  Website  Get quotation
VPIphotonics GmbH
Germany
Profile page  Website  Get quotation

If any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.


Follow our company page to keep track of our news!