Buyer's Guide … the one with the Encyclopedia!

Users Advertisers

Purchasing Advisor for Fiber Strippers

Find all you need for professionally buying fiber strippers: an interactive tool with a comprehensive and trustworthy directory of suppliers and expert guidance for a structured decision process with scientific and technical background information.

Top-level product category: icon fiber optics

Related product categories: fusion splicers, mechanical fiber splicing equipment, fiber cleavers, fiber optics

Fiber strippers are tools for removing the coating from the end of an optical fiber. This step is often required before splicing or connectorization, ensuring that the fiber ends are clean and ready for the next processing step.

Interactive Purchase Decision Tool

Purchasing high-value photonics products is a substantial responsibility. Using a structured decision-making process and high quality supplier data helps a lot:

See also:

How Responsible Purchase Decisions for Expensive Goods Like Lasers Are Done Explanations on this purchasing tool

Go through the process:

1. Understand the technical background

It is important to sufficiently understand the technology before buying.

Use the comprehensive learning resources of RP Photonics:

fibers cleaving of fibers "Passive Fiber Optics"

If you need personal help, contact RP Photonics to get technical consultancy.

2. Define your requirements

It is essential to fully understand and clearly define your requirements before you purchase.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying fiber strippers. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

Otherwise, you will need to talk to your technical colleagues.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

3. Find suitable suppliers

We suggest three steps:

  • Below, you can find our list of suppliers for fiber strippers. Use the checkboxes to mark possibly suitable suppliers.
  • The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
  • Based on the results, you can finally choose a supplier that is hopefully a good enough fit.

Selected suppliers:

(none so far)

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked:

4. Document the decision process

It is essential to document your purchasing process, not only its result (chosen supplier):

  • You will find it easier next time.
  • If something goes wrong, you can defend your decision by showing that you properly considered all important aspects. Or you see what needs to be done better next time.

Our interactive tool makes it easy: Fill out the form, and in the end print it to a PDF. Note that the document will show all sections (including those not currently shown on the screen), while omitting some irrelevant details such as the page navigation.

Suppliers for Fiber Strippers

18 suppliers for fiber strippers are listed in the RP Photonics Buyer's Guide, out of which one presents their product descriptions and images. Both manufacturers and distributors can be registered.

Suppliers with Advertising Package

presenting their product descriptions

Nyfors Teknologi AB
Solkraftsvägen 12
135 70 Stockholm
Sweden
Profile page  Website  
fiber strippers

NYFORS offers different devices for fiber stripping:

  • The AUTOPREP 2™ is a fully automated, high-speed fiber preparation unit. It strips, cleans and cleaves a fiber in less than 15 seconds. It is designed primarily for industrial applications, where accuracy, reliability and a high production yield are required. It is used for fast and chemical-free fiber preparation of acrylate-based fiber coatings and meets the highest industrial requirements of fast and consistent fiber preparation with extreme cleanliness and high fiber strength. Optimal cleaves are generated by a highly advanced and patent pending cleaving process.
  • The AUTOSTRIPPER 2™ uses heated air for fast, chemical-free window stripping of optical fibers. It is suitable for acrylate coating diameters up to 550 μm. The AUTOSTRIPPER 2™ meets the need for variable and multiple window strip lengths at high strength and ultra cleanliness.
  • The ULTRASONIC FC uses ultrasound at 40 kHz. It features dual cleaning positions and a large 0,7L solvent tank with programmable cleaning duration.
Product-specific web page

Your company's products are not listed here? Get our Advertising Package to enjoy that and many other benefits!

Other Suppliers

3SAE Technologies Inc.
United States
Al Dahiyah Group Trading
Saudi Arabia
Profile page  Website  
Datacomtools.com
United States
DPM Photonics
United States
Profile page  Website  
Beyond Technology
China
EuroLase
FiberLogix Intl. Ltd.
United Kingdom
FOSCO Connect
United States
FS.COM Inc
United States
Profile page  Website  
Industrial Fiber Optics, Inc.
United States
Laser Components GmbH
Germany
Profile page  Website  
L-com Global Connectivity
United States
Matrix Global Networks
United Kingdom
Profile page  Website  
Mefibo Limited
China
Profile page  Website  
NorthLab Photonics
Sweden
NorthLab Photonics AB
Sweden
Wuhan Sunma Technology Co, Ltd.
China

If any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.