Buyer's Guide … the one with the Encyclopedia!

Where to Buy Frequency Metrology Equipment

Optical frequency metrology is an area where extreme precision is possible e.g. for the measurement and generation of optical frequencies.

ELearn before you buy!
See our encyclopedia article on frequency metrology!
Related articles: frequency combs, optical frequency standards, optical clocks, optical clockworks

7 suppliers for frequency metrology equipment are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.

For making a list of those suppliers which you want to check more closely, first mark all suitable ones by clicking on the entries (making their background light gray). Then click on this button:

For documenting your supplier search, you may then print this page on paper or into a PDF document.

Suppliers with Ad Package
presenting their product descriptions
CompanyProduct Description

BOOST your LAB work with simplicity!

SILENTSYS SAS

57 Boulevard Demorieux
Le Mans Innovation
72000 Le Mans
France
frequency metrology equipment

The optical frequency discriminator (OFD) system of SILENTSYS smartly delivers a voltage signal that is proportional to the excursions of optical frequency of the input laser beam. This turn-key module is suitable for laser frequency noise characterization and/or for laser frequency stabilization to drastically reduced its optical full width at half maximum linewidth. The OFD features ultralow noise performances being successful in achieving frequency noise level as low as 0.1 Hz2/Hz with >60 dB noise reduction; and that is achieved in a compact and user-friendly package.

This product is available in a huge wavelength range from UV, VIS to NIR, with one or two optical modules inside to be a very versatil tool.

Enhance your laser with simplicity!

All wavelengths.

TOPTICA Photonics AG

Lochhamer Schlag 19
82166 Gräfelfing
Germany
www.toptica.com

E-mail:
(See the company profile page for additional contact information.)
frequency metrology equipment

TOPTICA’s frequency metrology product line uses TOPTICA proprietary CERO-technology which is based on difference frequency generation (DFG). It is inherently fCEO-stable and is characterized by a high robustness combined with high-end performance.

See us at SPIE Photonex + Vacuum Expo 2021, Sept. 28–30!

Your company's products are not listed here? Get our ad package to enjoy that and many other benefits!
All Suppliers
From your country:

Calmar Laser

951 Commercial Street
Palo Alto, CA 94303
United States
www.calmarlaser.com
E-mail:

Research Electro-Optics, Inc.

5505 Airport Blvd.
Boulder, CO 80301
United States
www.reoinc.com
E-mail:

Stable Laser Systems

4946 63rd Street, Suite B
Boulder CO 80301
United States
www.stablelasers.com
E-mail:
Outside America:

HighFinesse GmbH

Wöhrdstraße 4
72072 Tübingen
Germany
www.highfinesse.com
E-mail:

Opton Laser International

Parc Club Orsay Université
29 rue Jean Rostand
91893 Orsay
France
www.optonlaser.com
E-mail:

BOOST your LAB work with simplicity!

SILENTSYS SAS

57 Boulevard Demorieux
Le Mans Innovation
72000 Le Mans
France
frequency metrology equipment

The optical frequency discriminator (OFD) system of SILENTSYS smartly delivers a voltage signal that is proportional to the excursions of optical frequency of the input laser beam. This turn-key module is suitable for laser frequency noise characterization and/or for laser frequency stabilization to drastically reduced its optical full width at half maximum linewidth. The OFD features ultralow noise performances being successful in achieving frequency noise level as low as 0.1 Hz2/Hz with >60 dB noise reduction; and that is achieved in a compact and user-friendly package.

This product is available in a huge wavelength range from UV, VIS to NIR, with one or two optical modules inside to be a very versatil tool.

Enhance your laser with simplicity!

All wavelengths.

TOPTICA Photonics AG

Lochhamer Schlag 19
82166 Gräfelfing
Germany
www.toptica.com

E-mail:
(See the company profile page for additional contact information.)
frequency metrology equipment

TOPTICA’s frequency metrology product line uses TOPTICA proprietary CERO-technology which is based on difference frequency generation (DFG). It is inherently fCEO-stable and is characterized by a high robustness combined with high-end performance.

Click on a company entry to mark it.

Product entries of suppliers having an ad package are displayed with a logo, product description and product image.

Users: if any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.

Suppliers: you can report modified data using a form, which is provided via the button "Edit profile data" on your company profile page. You can obtain our ad package for getting a much improved visibility and many more leads. (Tell your marketing people about it!)

Report additional suppliers for these products!
Report Additional Suppliers for These Products

If you are a supplier and want to be listed, please use the registration form.

An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with a link at the bottom of the supplier's profile page.

Anyone, not only suppliers themselves, can report additional suppliers. If possible, please provide a web address showing that this supplier indeed offers such products.

Company:
URL:
Comments:
Prove that you are a human being: What is 7 + 5?