Where to Buy Large Mode Area Fibers
Optical fibers with particularly large mode areas are useful particularly for high-power fiber amplifiers and lasers, because they have reduced nonlinear effects.

More general products: fibers
Related products: large-core fibers, double-clad fibers, triple-clad fibers, fiber optics
Related product category: fiber optics
E | Learn before you buy! See our encyclopedia article on large mode area fibers! Related articles: large-core fibers, effective mode area, bend losses, numerical aperture, fiber amplifiers, photonic crystal fibers |
Check List for Large Mode Area Fibers
- What is the effective mode area or mode radius? (There are special large mode area fibers.)
- Is the fiber truly single-mode, or does it support a few modes? (In the latter case, careful launching maybe important for the output beam quality, and certain instabilities can occur for operation with very high average output power.)
- What are the propagation losses (in dB/km)?
- Does it need to be polarization-maintaining?
- How tight bending is possible, before the bend losses become too high?
- How much optical power can the fiber tolerate? (Additional properties at the launch end may still occur if too much power gets to the coating.)
- What is the outer fiber diameter with and without protective coating?
- What is the coating material? Is it a standard material which can be removed with a usual fiber stripper?
For active fibers, also look at the check list for rare-earth-doped fibers.
In case that you need additional advice, consultancy from RP Photonics may be the solution.
8 suppliers for large mode area fibers (LMA fibers) are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.
For making a list of those suppliers which you want to check more closely, first mark all suitable ones by clicking on the entries (making their background light gray). Then click on this button:
For documenting your supplier search, you may then print this page on paper or into a PDF document.
Suppliers with Ad Package presenting their product descriptions | |
---|---|
Company | Product Description |
![]() Solutions for Innovators Blokken 84 3460 Birkerød Denmark ISO 9001:2015 | ![]() The selection of photonic crystal fibers with large mode areas covers a range of fibers for diffraction-limited high power delivery. The very large mode area enables high power levels without nonlinear effects or material damage. With standard technology, you must trade large mode areas for single-mode operation, but our photonic crystal fibres with large mode areas provide single-mode operation in a large wavelength range – endlessly single-mode operation. See us at LASER World of PHOTONICS CHINA 2022 in Shanghai, July 13–15, (booth W2.2627)! |
![]() 34, Rue de la Croix de Fer 78100 Saint Germain-en-Laye France | ![]() iXblue offers a wide range of specialty optical fibers for lasers and amplifiers. We master erbium, erbium/ytterbium, ytterbium, thulium, holmium, thulium/holmium, neodymium, dysprosium, and phosphorous gain media. PM version are available, and Large Mode Area (LMA) or Very Large Mode Area (VLMA) versions as well. Depending of the requirement, single clad fibers are available for core pumping, double clad fibers for clad pumping. Triple clad and all glass structures are also available. |
Your company's products are not listed here? Get our ad package to enjoy that and many other benefits! |
All Suppliers | |
---|---|
From your country: | |
1195 Pennsylvania Avenue Bethlehem, PA 18018–2026 United States | www.cybel-llc.com E-mail: |
7 Airport Park Road East Granby, CT 06026 United States | |
Outside America: | |
Advanced Technology Innovation Centre Loughborough University Science and Enterprise Parks 5 Oakwood Drive Loughborough LE11 3QF United Kingdom | www.eluxi.co.uk E-mail: |
27th floor, Bank of East Asia Harbour View Centre 56 Gloucester Road, Wan Chai Hong Kong | www.gehtinternational.com E-mail: |
![]() 34, Rue de la Croix de Fer 78100 Saint Germain-en-Laye France | ![]() iXblue offers a wide range of specialty optical fibers for lasers and amplifiers. We master erbium, erbium/ytterbium, ytterbium, thulium, holmium, thulium/holmium, neodymium, dysprosium, and phosphorous gain media. PM version are available, and Large Mode Area (LMA) or Very Large Mode Area (VLMA) versions as well. Depending of the requirement, single clad fibers are available for core pumping, double clad fibers for clad pumping. Triple clad and all glass structures are also available. |
![]() Solutions for Innovators Blokken 84 3460 Birkerød Denmark ISO 9001:2015 | ![]() The selection of photonic crystal fibers with large mode areas covers a range of fibers for diffraction-limited high power delivery. The very large mode area enables high power levels without nonlinear effects or material damage. With standard technology, you must trade large mode areas for single-mode operation, but our photonic crystal fibres with large mode areas provide single-mode operation in a large wavelength range – endlessly single-mode operation. |
10 Bukit Batok Crescent #07–02 The Spire Singapore 658079 | |
Yangtze Optical Fibre and Cable Joint Stock Ltd. (YOFC) No. 9 Optics Valley Avenue Wuhan, Hubei 430073 China | |
Click on a company entry to mark it. Product entries of suppliers having an ad package are displayed with a logo, product description and product image. |
If you are a supplier and want to be listed, please use the registration form.
An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with a link at the bottom of the supplier's profile page.
Anyone, not only suppliers themselves, can report additional suppliers. If possible, please provide a web address showing that this supplier indeed offers such products.