Buying Laser Micromachining Devices

It is important to sufficiently understand the technology before buying.

Use the comprehensive learning resources of RP Photonics:

If you need personal help, contact RP Photonics to get technical consultancy.

I feel that I sufficiently understand the technical background.

It is essential to fully understand and clearly define your requirements before you buy.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying laser micromachining devices. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

I think that I am sufficiently informed about our requirements.

Otherwise, you will need to talk to your technical colleagues.

I consider the above list of specifications to be sufficiently complete, clear and accurate.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

Insert these criteria when creating inquiry mails to suppliers with the buttons "Get quotation".

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

We suggest three steps:

• Below, you can find our list of suppliers for laser micromachining devices. Use the checkboxes to mark possibly suitable suppliers.
• The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
• Based on the results, you can finally choose a supplier that is hopefully a good enough fit.

Selected suppliers:

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked: