Buyer's Guide … the one with the Encyclopedia!

Users Advertisers

Purchasing Advisor for Laser Modeling Software

Find all you need for professionally buying laser modeling software: an interactive tool with a comprehensive and trustworthy directory of suppliers and expert guidance for a structured decision process with scientific and technical background information.

Top-level product categories: icon calculations, software and design

Related product category: laser development services

There are software packages that serve as powerful tools for setting up and working with laser models. They address issues like power conversion in laser gain media, modes of optical fibers and laser resonators, thermal lensing, nonlinearities, and laser dynamics in pulse generation and amplification.

Interactive Purchase Decision Tool

Purchasing high-value photonics products is a substantial responsibility. Using a structured decision-making process and high quality supplier data helps a lot:

See also:

How Responsible Purchase Decisions for Expensive Goods Like Lasers Are Done Explanations on this purchasing tool

Go through the process:

1. Understand the technical background

It is important to sufficiently understand the technology before buying.

Use the comprehensive learning resources of RP Photonics:

encyclopedia article laser modeling and simulation laser resonators rate equation modeling laser dynamics pulse propagation modeling

If you need personal help, contact RP Photonics to get technical consultancy.

2. Define your requirements

It is essential to fully understand and clearly define your requirements before you purchase.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying laser modeling software. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

Otherwise, you will need to talk to your technical colleagues.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

3. Find suitable suppliers

We suggest three steps:

  • Below, you can find our list of suppliers for laser modeling software. Use the checkboxes to mark possibly suitable suppliers.
  • The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
  • Based on the results, you can finally choose a supplier that is hopefully a good enough fit.

Selected suppliers:

(none so far)

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked:

4. Document the decision process

It is essential to document your purchasing process, not only its result (chosen supplier):

  • You will find it easier next time.
  • If something goes wrong, you can defend your decision by showing that you properly considered all important aspects. Or you see what needs to be done better next time.

Our interactive tool makes it easy: Fill out the form, and in the end print it to a PDF. Note that the document will show all sections (including those not currently shown on the screen), while omitting some irrelevant details such as the page navigation.

Suppliers for Laser Modeling Software

6 suppliers for laser modeling software are listed in the RP Photonics Buyer's Guide, out of which one presents their product descriptions and images. Both manufacturers and distributors can be registered.

Suppliers with Advertising Package

presenting their product descriptions

RP Photonics AG
Bannhaldenstr. 38
8500 Frauenfeld
Switzerland
Profile page  Website  

See us at LASER World of Photonics 2025 in Munich, June 24–27 (booth A2.546)!

We have powerful modeling and simulation software for modeling various aspects of solid-state lasers, in particular RP Fiber Power for fiber laser and amplifier design and RP Resonator for designing laser resonators. Also, we offer technical consulting services.

Product-specific web page

Your company's products are not listed here? Get our Advertising Package to enjoy that and many other benefits!

Other Suppliers

COMSOL, Inc.
United States
DPM Photonics
United States
Profile page  Website  
Optikexpertisen
Germany
Profile page  Website  
Photon Design
United Kingdom
VPIphotonics GmbH
Germany

If any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.