Buyer's Guide > Users > Product categories > LIDAR equipment

Buying LIDAR Equipment

Top-level product categories: icon applications, icon vision, displays and imaging

LIDAR technology is used for a wide range of applications, including turbulence detection for airplanes and wind turbines, atmospheric and environmental studies, geodesy, security surveillance, autonomous vehicles, robotics, and military applications. LIDAR systems analyze reflected or back-scattered laser light to provide detailed spatial information.

Making Good Purchase Decisions

As the most professional photonics purchasing portal, RP Photonics helps you to not only to find all relevant suppliers (not limited to our advertisers), but also to make good purchasing decisions.

NEW: Structured Decision Process

Purchasing involves a lot of responsibility. We recommend that you apply best practice by using the following structured process: Go through the following expandable sections, complete the form and finally come to a purchase decision. You can then print that to a PDF for documenting the process.

Our article on best practices for purchasing and another one explaining this tool give you valuable insights.

1. Understand the technical background

It is important to sufficiently understand the technology before buying.

Use the comprehensive learning resources of RP Photonics:

LIDAR laser applications distance measurements with lasers

If you need personal help, contact RP Photonics to get technical consultancy.

I feel that I sufficiently understand the technical background.

2. Define your requirements

It is essential to fully understand and clearly define your requirements before you buy.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying LIDAR equipment. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

I think that I am sufficiently informed about our requirements.

Otherwise, you will need to talk to your technical colleagues.

I consider the above list of specifications to be sufficiently complete, clear and accurate.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

Insert these criteria when creating inquiry mails to suppliers with the buttons "Get quotation".

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

3. Find suitable suppliers

We suggest three steps:

Below, you can find our list of suppliers for LIDAR equipment. Use the checkboxes to mark possibly suitable suppliers.
The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
Based on the results, you can finally choose a supplier that is hopefully a good enough fit.

Selected suppliers:

(none so far)

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked:

Suppliers for LIDAR Equipment

35 suppliers for LIDAR equipment are listed in the RP Photonics Buyer's Guide, out of which 9 present their product descriptions. Both manufacturers and distributors can be registered.

Suppliers with Advertising Package

presenting their product descriptions

Laser Technology Redefined

LEDlas Corp.
Hope-IPT No.101, Section 2
Kuang-Fu Road, Hsinchu
Taiwan 30013, R.O.C