Where to Buy Pockels Cell Drivers
Pockels cells are used for quite different applications like active Q switching and mode locking of lasers, cavity dumping, regenerative amplification, pulse picking and the modulation of laser beams. The requirements are very different, and the chosen Pockels cell driver should fitted to those.
E | See also our encyclopedia article on Pockels cell drivers! Related article: Pockels cells |
Related products: Pockels cells
Related product category: optical modulators
18 suppliers for Pockels cell drivers are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.
Suppliers with Ad Package presenting their product descriptions | |
---|---|
Company | Product Description |
![]() From crystals to coatings, service across the spectrum 181 Legrand Avenue Northvale, NJ 07647 United States | ![]() The Inrad Optics V series Pockels cell driver is designed for fast, high-voltage switching for small capacitive loads, such as Pockels cells. It is compatible with our line of KD*P, LiNbO3, and BBO Pockels cells. The V driver plugs directly into a wall outlet and can be triggered either internally or via synchro. See us at SPIE Photonics West Digital Marketplace 2021 (online), March 6–11! |
![]() Dowlish Ford Ilminster TA19 0PF United Kingdom | ![]() G&H Pockels cell drivers have been developed to complement our range of Pockels Cells. High quality components are integrated into our designs to maximize lifetime, safety, and reliability. Our Pockels cell drivers include the Q-series Q-switch drivers and R-series regenerative amplifier drivers. Q-switch drivers provide a fast rise time followed by a longer decay time. Regenerative amplifier drivers have a square pulse with a fast rise and fall time, adjustable pulse width and may be operated to 100 kHz or more. The Q series product line includes the Lab Q-Drive, OEM Q-Drive, and QDP models while the R series product line includes the R200, the R200 System, the HVR, and the HVR System. |
![]() Mokslininku str. 11 08412 Vilnius Lithuania Quality: ISO 9001:2015 | ![]() EKSMA Optics has Pockels cell drivers designed for a wide range of applications and operating modes: pulse selection, Q-switching, cavity dumping, CW beam chopping and burst modes. The drivers are available for various output voltages, repetition rates and rise/fall times of the high voltage pulses. |
![]() Leading in Ultrafast Kapteyn-Murnane Laboratories Inc. 4775 Walnut St. #102 Boulder, CO 80301 United States | ![]() The KMLabs Eclipse is a high repetition rate, half wave Pockels cell and driver unit, designed for laser pulse picking at up to 20 kHz. The Eclipse has a minimum window of 10 ns, and >90% throughput between 750 nm and 850 nm. KMLabs’ compact design allows the driver to be packaged in with the optical unit, thus minimizing the high voltage line-length, and thereby maximizing the switching speed. The high voltage source for the Eclipse is an external, 19”w x 13”d x 3.5”h unit. |
Your company's products are not listed here? Get our ad package to enjoy that and many other benefits! |
All Suppliers | |
---|---|
From your country: | |
126 Baywood Avenue Longwood, FL 32750 United States | analogmodules.com E-mail: |
Electro Optical Components, Inc. 5460 Skylane Blvd. Santa Rosa, CA 95403 United States | |
![]() From crystals to coatings, service across the spectrum 181 Legrand Avenue Northvale, NJ 07647 United States | ![]() The Inrad Optics V series Pockels cell driver is designed for fast, high-voltage switching for small capacitive loads, such as Pockels cells. It is compatible with our line of KD*P, LiNbO3, and BBO Pockels cells. The V driver plugs directly into a wall outlet and can be triggered either internally or via synchro. |
![]() Leading in Ultrafast Kapteyn-Murnane Laboratories Inc. 4775 Walnut St. #102 Boulder, CO 80301 United States | ![]() The KMLabs Eclipse is a high repetition rate, half wave Pockels cell and driver unit, designed for laser pulse picking at up to 20 kHz. The Eclipse has a minimum window of 10 ns, and >90% throughput between 750 nm and 850 nm. KMLabs’ compact design allows the driver to be packaged in with the optical unit, thus minimizing the high voltage line-length, and thereby maximizing the switching speed. The high voltage source for the Eclipse is an external, 19”w x 13”d x 3.5”h unit. |
Outside America: | |
Bertha-von-Suttner-Str. 5 37085 Göttingen Germany | |
Fraunhoferstr. 22 82152 Martinsried Germany | www.amstechnologies.com E-mail: |
Flugplatzstr. F1 Nr. 9 15344 Strausberg Germany | |
![]() Mokslininku str. 11 08412 Vilnius Lithuania Quality: ISO 9001:2015 | ![]() EKSMA Optics has Pockels cell drivers designed for a wide range of applications and operating modes: pulse selection, Q-switching, cavity dumping, CW beam chopping and burst modes. The drivers are available for various output voltages, repetition rates and rise/fall times of the high voltage pulses. |
![]() Dowlish Ford Ilminster TA19 0PF United Kingdom | ![]() G&H Pockels cell drivers have been developed to complement our range of Pockels Cells. High quality components are integrated into our designs to maximize lifetime, safety, and reliability. Our Pockels cell drivers include the Q-series Q-switch drivers and R-series regenerative amplifier drivers. Q-switch drivers provide a fast rise time followed by a longer decay time. Regenerative amplifier drivers have a square pulse with a fast rise and fall time, adjustable pulse width and may be operated to 100 kHz or more. The Q series product line includes the Lab Q-Drive, OEM Q-Drive, and QDP models while the R series product line includes the R200, the R200 System, the HVR, and the HVR System. |
511 Hashita 9955256 Beit Shemesh Israel | www.ILPhotonics.com E-mail: |
Albert-Einstein-Str. 18 86899 Landsberg am Lech Germany | |
137 avenue Anatole France, 94600 Choisy le Roi France | www.nano-giga.fr E-mail: |
In den Niederwiesen 4a 76744 Wörth am Rhein Germany | www.nortus-optronic.com E-mail: |
Marie-Curie-Strasse 23 49134 Wallenhorst Germany | |
Innovation Centre University Way Cranfield, Bedfordshire MK43 0BT United Kingdom | www.pro-lite.co.uk E-mail: |
Qioptiq Photonics GmbH & Co KG Hans-Riedl-Str. 9 85622 Feldkirchen Germany | |
Greimelstr. 26 83236 Übersee Germany | |
10 Bukit Batok Crescent #07–02 The Spire Singapore 658079 | |
Click on a company entry to mark it. Product entries of suppliers having an ad package are displayed with a logo, product description and product image. |
Users: if any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.
Suppliers: you can report modified data using a form, which is provided via the button "Edit profile data" on your company profile page. You can obtain our ad package for getting a much improved visibility and many more leads. (Tell your marketing people about it!)
If you are a supplier and want to be listed, please use the registration form.
An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with a link at the bottom of the supplier's profile page.
Anyone, not only suppliers themselves, can report additional suppliers. If possible, please provide a web address showing that this supplier indeed offers such products.