Buyer's Guide … the one with the Encyclopedia!

Where to Buy Prototype Building and Testing

When lasers and other optical devices are developed, it is often necessary to build and test prototypes.

13 suppliers for prototype building and testing are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.

For making a list of those suppliers which you want to check more closely, first mark all suitable ones by clicking on the entries (making their background light gray). Then click on this button:

For documenting your supplier search, you may then print this page on paper or into a PDF document.

Suppliers with Ad Package
presenting their product descriptions
CompanyProduct Description

Technologie Manufaktur GmbH & Co. KG

Hannah-Vogt-Str. 1
37085 Göttingen
Germany
prototype building and testing

Optical prototyping, i.e. the optomechanical construction of the prototype and the development of its electronics, takes place at Technologie Manufaktur parallel to the work on the breadboard in the laboratory. For this reason, there is usually not much time between construction of the demonstrator and completion of the prototype.

Our well-equipped workshop allows us to build the prototype quickly, adjust it precisely and to measure its performance. We can carry out MTF measurements on lenses, measure the surfaces of optical elements interferometrically and record spectra from UV to near-infrared. We use a flow box for dust-free production. The mechanical means required for the prototype are manufactured in the workshops of our suppliers.

Avantier

1100 US-22
North Plainfield, NJ 07060
United States
web link avantierinc.com
E-mail:
ISO 9001:2015, ISO 13485:2016

Avantier provides quick optical prototype solutions that reduce product development life-cycles and enable rapid prototyping. This is crucial for devices, instruments, and platforms that rely on optics and imaging, especially with the introduction of new technologies. Faster prototyping leads to faster time-to-market, which is essential for our customers.

Your Custom Optics Expert

Shanghai Optics Inc.

17 Brant Ave Suite 6
Clark, NJ 07066
United States
web link www.shanghai-optics.com

E-mail:
ISO 9001:2015, ISO 13485:2016

Shanghai Optics offers rapid optical prototype solutions. Reducing custom optical product life-cycles and delivering true rapid prototyping is critical to the success of devices, instruments, and platforms that rely on optics and imaging. With new technologies being introduced at such lightning speed, decreasing the time it takes to develop prototypes has become a necessity. The faster customers can prototype, the faster a product can get to market. Depending on the customer’s timeline and sourcing requirements, Shanghai Optics (S.O.) different solutions and resources to quickly create solutions and optimize the speed of prototyping for our customers.


Your company's products are not listed here? Get our ad package to enjoy that and many other benefits!
All Suppliers
From your country:

Avantier

1100 US-22
North Plainfield, NJ 07060
United States
web link avantierinc.com
E-mail:
ISO 9001:2015, ISO 13485:2016

Avantier provides quick optical prototype solutions that reduce product development life-cycles and enable rapid prototyping. This is crucial for devices, instruments, and platforms that rely on optics and imaging, especially with the introduction of new technologies. Faster prototyping leads to faster time-to-market, which is essential for our customers.

Fibersense & Signals Inc.

4423 Fortran Court, Ste. 111
San Jose, CA 95134
United States
www.fibersensefirst.com
E-mail:

Greenlight Optics

8940 Glendale-Milford Road
Loveland, Ohio 45140
United States

Newport Corporation

1791 Deere Avenue
Irvine, CA 92606
United States

Your Custom Optics Expert

Shanghai Optics Inc.

17 Brant Ave Suite 6
Clark, NJ 07066
United States
web link www.shanghai-optics.com

E-mail:
ISO 9001:2015, ISO 13485:2016

Shanghai Optics offers rapid optical prototype solutions. Reducing custom optical product life-cycles and delivering true rapid prototyping is critical to the success of devices, instruments, and platforms that rely on optics and imaging. With new technologies being introduced at such lightning speed, decreasing the time it takes to develop prototypes has become a necessity. The faster customers can prototype, the faster a product can get to market. Depending on the customer’s timeline and sourcing requirements, Shanghai Optics (S.O.) different solutions and resources to quickly create solutions and optimize the speed of prototyping for our customers.


From America:

Castor Optics Inc.

361 Montpellier Blvd
Saint-Laurent, QC H4N 2G6
Canada
www.castoroptics.com
E-mail:
Outside America:

ALL-IN OPTICS

Am Alten Sportplatz 5
47551 Bedburg-Hau
Germany
all-in-optics.de/de
E-mail:

ASE Optics Europe

Carrer Cerdanya 44
08820 El Prat de Llobregat
Spain

Docter Optics SE

Mittelweg 29
07806 Neustadt an der Orla
Germany

Fraunhofer-Institut für Zuverlässigkeit und Mikrointegration (IZM)

Abt. SIIT/Optical Interconnection Technology
Gustav-Meyer-Allee 25
13355 Berlin
Germany
www.izm.fraunhofer.de/de/abteilungen/system_integrationinterconnectiontechnologies/arbeitsgebiete/photonic-packaging.html
E-mail:

Fuzhou Solid Photon Inc

No. 23, 3F Building 7
Rongcheng Park 10 South Road
Jinrong Cangshan, Fujian
China

Southern Photonics Ltd

Level 6, Symonds Centre
49 Symonds Street
Auckland 1010
New Zealand

Technologie Manufaktur GmbH & Co. KG

Hannah-Vogt-Str. 1
37085 Göttingen
Germany
prototype building and testing

Optical prototyping, i.e. the optomechanical construction of the prototype and the development of its electronics, takes place at Technologie Manufaktur parallel to the work on the breadboard in the laboratory. For this reason, there is usually not much time between construction of the demonstrator and completion of the prototype.

Our well-equipped workshop allows us to build the prototype quickly, adjust it precisely and to measure its performance. We can carry out MTF measurements on lenses, measure the surfaces of optical elements interferometrically and record spectra from UV to near-infrared. We use a flow box for dust-free production. The mechanical means required for the prototype are manufactured in the workshops of our suppliers.

Click on a company entry to mark it.

Product entries of suppliers having an ad package are displayed with a logo, product description and product image.

Users: if any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.

Suppliers: you can report modified data using a form, which is provided via the button "Edit profile data" on your company profile page. You can obtain our ad package for getting a much improved visibility and many more leads. (Tell your marketing people about it!)

Report additional suppliers for these products!
Report Additional Suppliers for These Products

If you are a supplier and want to be listed, please use the registration form.

An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with a link at the bottom of the supplier's profile page.

Anyone, not only suppliers themselves, can report additional suppliers. If possible, please provide a web address showing that this supplier indeed offers such products.

Company:
URL:
Comments:
Prove that you are a human being: What is 7 + 5?