Where to Buy Testing Equipment and Services for Optics and Photonics
Sophisticated equipment is needed for certain test procedures. Therefore, it can make sense to use a specialist who can carefully test optical components, photonic integrated circuits or photonic systems.
More specific products: laser testing equipment, laser-induced damage threshold measurements and equipment, optical metrology services, prototype building and testing
Related product category: services and training
22 suppliers for testing equipment and services for optics and photonics are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.
For making a list of those suppliers which you want to check more closely, first mark all suitable ones by clicking on the entries (making their background light gray). Then click on this button:
For documenting your supplier search, you may then print this page on paper or into a PDF document.
Suppliers with Ad Package presenting their product descriptions | |
---|---|
Company | Product Description |
Laser Diodes. Redefined. 3 West Pier Business Campus Dun Laoghaire Dublin A96 A621 Ireland |
We have expertise in mass-market testing and back-end services. Built on decades of experience in both the telecommunications and datacoms sectors, Eblana Photonics now offer that same experience in providing high volume backend services for all our customers. With in-house expertise in a number of crucial areas including laser and gain-chip facet coating, high volume testing, screening and singulation, Eblana Photonics is the ideal partner for all your optoelectronics requirements. |
Lasers for the Molecular Age Luruper Hauptstr. 1 22547 Hamburg Germany |
Cycle offers the lowest noise timing detectors in the market based on its patented balanced optical cross-correlator (BOC) and balanced optical microwave phase detector (BOMPD) technologies. The BOC detects the relative timing jitter between two independent optical pulse trains with identical center wavelengths, whereas the BOMPD detects the timing jitter or phase noise between an optical pulse train and the zero-crossings of a microwave signal. Cycle’s BOCs and BOMPDs provide exceptionally high timing sensitivity, attosecond timing resolution, and AM-PM conversion suppression against environmental fluctuations. We offer BOCs operating on 800 nm, 1030 nm and 1550 nm wavelengths. We also offer two color BOCs (TCBOC) to measure the timing jitter of lasers at different center wavelengths. Our BOMPDs operate with a wide range of microwave frequencies (10 MHz – 10 GHz) and optical wavelengths (800 nm, 1030 nm and 1550 nm). |
The Standard of Accuracy Wöhrdstraße 4 72072 Tübingen Germany www.highfinesse.com E-mail: |
HighFinesse offers various kinds of devices for testing lasers:
|
Test. Measure. Solve. 12–14 Parkway Drive Auckland 0632 New Zealand |
Quantifi Photonics designs and manufactures a wide range photonic test solutions including lasers, optical spectrum analyzers, power meters and more. The company specialize in testing silicon photonics, co-packaged optics (CPO) and pluggable transceivers. Their solutions are used to test photonic integrated circuits (PICs), optical engines and pluggable optical transceivers, and are optimized for high density, high channel count applications in manufacturing environments. The company also offers unique solutions for coherent optical communications, photon Doppler velocimetry, and optical pulse analysis. |
1100 US-22 North Plainfield, NJ 07060 United States ISO 9001:2015, ISO 13485:2016, ISO: 14001:2015 |
Avantier uses advanced optical metrology equipment to test both our own and our customers' precision optical components and systems. We thoroughly inspect and qualify the produced parts according to customers' specific requirements and in accordance with MIL-SPEC standards. |
Your company's products are not listed here? Get our ad package to enjoy that and many other benefits! |
All Suppliers | |
---|---|
From your country: | |
1100 US-22 North Plainfield, NJ 07060 United States ISO 9001:2015, ISO 13485:2016, ISO: 14001:2015 |
Avantier uses advanced optical metrology equipment to test both our own and our customers' precision optical components and systems. We thoroughly inspect and qualify the produced parts according to customers' specific requirements and in accordance with MIL-SPEC standards. |
770 Canning Parkway Victor, NY 14564 United States | www.bristol-inst.com E-mail: |
40 Manning Road Billerica, MA 01821 United States | |
2803 Hertha Ave Orlando, FL 32826 United States | chronosphotonics.com E-mail: |
1400 Fountaingrove Parkway Santa Rosa, CA 95403–1738 United States | |
Outside America: | |
6 rue Jean Mermoz ZA Saint Guénault 91080 Evry-Courcouronnes France | |
88 Wenmao Road, Guishan District Taoyuan City 333001 Taiwan | www.chromaate.com E-mail: |
Lasers for the Molecular Age Luruper Hauptstr. 1 22547 Hamburg Germany |
Cycle offers the lowest noise timing detectors in the market based on its patented balanced optical cross-correlator (BOC) and balanced optical microwave phase detector (BOMPD) technologies. The BOC detects the relative timing jitter between two independent optical pulse trains with identical center wavelengths, whereas the BOMPD detects the timing jitter or phase noise between an optical pulse train and the zero-crossings of a microwave signal. Cycle’s BOCs and BOMPDs provide exceptionally high timing sensitivity, attosecond timing resolution, and AM-PM conversion suppression against environmental fluctuations. We offer BOCs operating on 800 nm, 1030 nm and 1550 nm wavelengths. We also offer two color BOCs (TCBOC) to measure the timing jitter of lasers at different center wavelengths. Our BOMPDs operate with a wide range of microwave frequencies (10 MHz – 10 GHz) and optical wavelengths (800 nm, 1030 nm and 1550 nm). |
Laser Diodes. Redefined. 3 West Pier Business Campus Dun Laoghaire Dublin A96 A621 Ireland |
We have expertise in mass-market testing and back-end services. Built on decades of experience in both the telecommunications and datacoms sectors, Eblana Photonics now offer that same experience in providing high volume backend services for all our customers. With in-house expertise in a number of crucial areas including laser and gain-chip facet coating, high volume testing, screening and singulation, Eblana Photonics is the ideal partner for all your optoelectronics requirements. |
Im Finigen 3 28832 Achim Germany | |
Tremskamp 5 23611 Bad Schwartau Germany | |
An der Kälberweide 12 82299 Türkenfeld Germany | |
Hans-Knöll-Str. 6 07745 Jena, Germany Germany | |
The Standard of Accuracy Wöhrdstraße 4 72072 Tübingen Germany www.highfinesse.com E-mail: |
HighFinesse offers various kinds of devices for testing lasers:
|
Dayka Gábor u. 6/B Budapest 1118 Hungary | optimal-optik.com/index.html E-mail: |
11 Toh Guan Road East #04–01 #04–01 APP Enterprise Building Singapore 608603 | www.opto.com.sg E-mail: |
Am Weichselgarten 7 91058 Erlangen Germany | www.optocraft.de E-mail: |
Vretenvägen 13 171 54 Solna Sweden | |
Batiment EXPLORER Espace technologique Route de l’orme des Merisiers 91190 Saint-Aubin France | www.phasics.com E-mail: |
Test. Measure. Solve. 12–14 Parkway Drive Auckland 0632 New Zealand |
Quantifi Photonics designs and manufactures a wide range photonic test solutions including lasers, optical spectrum analyzers, power meters and more. The company specialize in testing silicon photonics, co-packaged optics (CPO) and pluggable transceivers. Their solutions are used to test photonic integrated circuits (PICs), optical engines and pluggable optical transceivers, and are optimized for high density, high channel count applications in manufacturing environments. The company also offers unique solutions for coherent optical communications, photon Doppler velocimetry, and optical pulse analysis. |
6–18–14 Nishi-kasai, Edogawa-ku Tokyo 134–0088 Japan | |
Trooperslane Industrial Estate 20 Meadow Straße Carrickfergus BT38 8YF Northern Ireland | |
Click on a company entry to mark it. Product entries of suppliers having an ad package are displayed with a logo, product description and product image. |
If you are a supplier and want to be listed, please use the registration form.
An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with a link at the bottom of the supplier's profile page.
Anyone, not only suppliers themselves, can report additional suppliers. If possible, please provide a web address showing that this supplier indeed offers such products.