Buyer's Guide > Users > Product categories > vacuum beam delivery systems

Buying Vacuum Beam Delivery Systems

Top-level product category: icon optical components and devices

More general product categories: beam delivery systems

Delivering laser beams in vacuum environments presents unique challenges. Specialized vacuum beam delivery systems, including beam steering setups with externally controlled mirrors housed in vacuum chambers, are essential for maintaining beam quality and stability in such conditions.

Making Good Purchase Decisions

As the most professional photonics purchasing portal, RP Photonics helps you to not only to find all relevant suppliers (not limited to our advertisers), but also to make good purchasing decisions.

NEW: Structured Decision Process

Purchasing involves a lot of responsibility. We recommend that you apply best practice by using the following structured process: Go through the following expandable sections, complete the form and finally come to a purchase decision. You can then print that to a PDF for documenting the process.

Our article on best practices for purchasing and another one explaining this tool give you valuable insights.

1. Understand the technical background

It is important to sufficiently understand the technology before buying.

Use the comprehensive learning resources of RP Photonics:

laser beams

If you need personal help, contact RP Photonics to get technical consultancy.

I feel that I sufficiently understand the technical background.

2. Define your requirements

It is essential to fully understand and clearly define your requirements before you buy.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying vacuum beam delivery systems. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

I think that I am sufficiently informed about our requirements.

Otherwise, you will need to talk to your technical colleagues.

I consider the above list of specifications to be sufficiently complete, clear and accurate.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

Insert these criteria when creating inquiry mails to suppliers with the buttons "Get quotation".

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

3. Find suitable suppliers

We suggest three steps:

Below, you can find our list of suppliers for vacuum beam delivery systems. Use the checkboxes to mark possibly suitable suppliers.
The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
Based on the results, you can finally choose a supplier that is hopefully a good enough fit.

Selected suppliers:

(none so far)

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked:

Suppliers for Vacuum Beam Delivery Systems

2 suppliers for vacuum beam delivery systems are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.

Suppliers with Advertising Package presenting their product descriptions
few-cycle Inc. 1650 Boul. Lionel-Boulet J3X 1P7 Varennes, Quebec Canada Profile page Website	few-cycle offers a beam steering system with 4-axis manual control of the beam path under vacuum. Yaw, pitch, rotation and position adjustments are implemented with a highly stable flexure mount. The device supports optics with diameters up to 3”. Flange type: KF 50. Pressure down to 10⁻⁶ mbar. Vacube chambers enable customer-configurable beam routing under vacuum – maximally compact and maximum access. By separating the steps of optical alignment and pressure induced stress release, our design enables optical adjustment with free access to the mounts without the usual inconveniences of a vacuum chamber. Product-specific web page
Your company's products are not listed here? Get our advertising package to enjoy that and many other benefits!

Suppliers with Advertising Package
presenting their product descriptions

few-cycle Inc.
1650 Boul. Lionel-Boulet
J3X 1P7 Varennes, Quebec
Canada

Profile page Website

few-cycle offers a beam steering system with 4-axis manual control of the beam path under vacuum. Yaw, pitch, rotation and position adjustments are implemented with a highly stable flexure mount. The device supports optics with diameters up to 3”. Flange type: KF 50. Pressure down to 10⁻⁶ mbar.

Vacube chambers enable customer-configurable beam routing under vacuum – maximally compact and maximum access. By separating the steps of optical alignment and pressure induced stress release, our design enables optical adjustment with free access to the mounts without the usual inconveniences of a vacuum chamber.

Product-specific web page

Your company's products are not listed here? Get our advertising package to enjoy that and many other benefits!

Other Suppliers
PHOTONICPARTS Germany	Profile page Website

If any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.

Follow our company page to keep track of our news!