Femto Easy

Femto Easy offers two different types of very compact and handy autocorrelators for ultrashort pulse characterization:

• The ROC autocorrelator is a single-shot autocorrelator, thus it needs only a single pulse to measure its duration. It is very compact and extremely easy to use. It covers a wide range of pulse energies from a few hundred picojoules to a few millijoules, and durations from 5 fs to 10 ps. Also based on a single-shot architecture, the µ-ROC is the most compact autocorrelator ever built.
• The MS-ROC autocorrelator is a multi-shot autocorrelator. It uses a particularly fast optical delay line to scan the delay, minimizing the measurement time. It can measure pulses with energies as low as 50 pJ, and with its fine-scan mode for durations even below 50 fs.

Femto Easy offers various types of BeamPro beam profilers with different specifications:

• The BeamPro small pixels profilers are available with pixel sizes from 1.45 μm to 3 μm. They are suitable for measuring focused laser beams with diameters down to 10 µm or less.
• The BeamPro large area profilers are suitable for laser beam diameters greater than 7 m, even up to 25 mm without additional optics.
• The Beampro compact footprint profiler is less than 15 mm thick, allowing beam profiling in small spaces.
• The BeamPro SWIR profilers are available with a wide range of SWIR InGaAs-based sensor for measurements of laser beams within 900 – 1700 nm.

They all come with a powerful and user-friendly software.

Femto Easy offers various types of BeamPro beam profilers with different specifications:

• The BeamPro small pixels profilers are available with pixel sizes from 1.45 μm to 3 μm. They are suitable for measuring focused laser beams with diameters down to 10 µm or less.
• The BeamPro large area profilers are suitable for laser beam diameters greater than 7 m, even up to 25 mm without additional optics.
• The Beampro compact footprint profiler is less than 15 mm thick, allowing beam profiling in small spaces.
• The BeamPro square format profilers are available with the widest range of square sensors, offering the ultimate combination of small pixels, large area and global shutter in a single device.
• The BeamPro SWIR profilers are available with a wide range of SWIR InGaAs-based sensor for measurements of laser beams within 900 – 1700 nm.

They all come with a powerful and user-friendly software.

Femto Easy offers two types of FROG devices for ultrashort pulse characterization:

• The Fast FROG is a single-shot FROG, requiring only a single pulse to measure the profile. It is easy to fully characterize pulses with durations from <5 fs to 10 ps and in a wide spectral range.
• The MS-FROG is a multi-shot FROG based on a scanned optical delay line. It can measure pulses with energies as low as 50 pJ. The same device can measure very short pulses and long pulses, from 5 fs to 80 ps.

These devices are very easy to install and use. They are also quite versatile as the built-in spectrometer can easily be changed for addressing different wavelength ranges, thanks to its plug & play design.

The MISS (Mini Imaging Spatial Spectrometer) is an innovative imaging spectrometer for ultrashort pulse characterization. It provides optical spectra with spatial resolution in one direction of a laser beam, thus allowing for vertical and horizontal spatial chirp measurements. Both free-space and fiber input versions are available.

The Nano4th is an ultra-compact device that converts your femtosecond low-energy IR laser pulses (nJ-range) into 2^nd and 4^th harmonics with best-in-class conversion efficiency. Its industrial-grade design makes it a robust and reliable solution that will extend the capabilities of your laser. The design is easily adaptable to higher pulse energies, up to the microjoule or millijoule level.

Femto Easy offers different kinds of devices for the characterization of ultrashort light pulses:

• Single-shot and scanning autocorrelators are easy tools for measuring pulse durations.
• FROG devices allow for full pulse characterization. They are also available in single-shot and scanning versions.

All devices are optimized for easy installation and handling.

Femto Easy offers two different types of very compact and handy autocorrelators for ultrashort pulse characterization:

• The ROC autocorrelator is a single-shot autocorrelator, thus it needs only a single pulse to measure its duration. It is very compact and extremely easy to use. It covers a wide range of pulse energies from a few hundred picojoules to a few millijoules, and durations from 5 fs to 10 ps.
• The MS-ROC autocorrelator is a multi-shot autocorrelator. It uses a particularly fast optical delay line to scan the delay, minimizing the measurement time. It can measure pulses with energies as low as 50 pJ, and with its fine-scan mode for durations even below 50 fs.

The MISS (Mini Imaging Spatial Spectrometer) is an innovative imaging spectrometer for ultrashort pulse characterization. It provides optical spectra with spatial resolution in one direction of a laser beam, thus allowing for vertical and horizontal spatial chirp measurements. Both free-space and fiber input versions are available.