Buyer's Guide … the one with the Encyclopedia!

Supplier profile:

Gentec Electro-Optics

Partners for accuracy

Gentec Electro-Optics, Inc.
445 St-Jean-Baptiste, Suite 160
Quebec, QC
Canada G2E 5N7

Tel.:+1 418 651 8003
Fax:+1 418 651 1174
Website:www.gentec-eo.com
Social media:
Quality certificate:ISO 9001:2015

Company Description

Gentec Electro-Optics has a long history in the laser measurement field. With a 40 year track record of innovation and providing quality solutions for laser power and energy measurement applications from the factory to the hospital and laboratory, Gentec-EO stands ready to serve you now and in the future.

Gentec Electro-Optics

Sponsoring

Gentec Electro-Optics is a Bronze sponsor of the RP Photonics Encyclopedia. We thank all encyclopedia sponsors for their support of this resource, which benefits the whole photonics community!

News

2022-06-07

Gentec-EO launches new high-power laser power detector for fiber lasers up to 15 kW

Quebec City, QC, Canada, June 3, 2022 – Gentec-EO launches the HP60A-15KW-GD-QBH power detector series for measurement of fiber lasers with power up to 15 kW.

This new laser power detector is ideal for those in need to measure average laser power for burn-in tests, during long periods of time or even quickly in the field with the simplicity of connecting a fiber laser output directly to the detector.

The HP60A-15KW-QBH series is calibrated to NIST standards and has damage thresholds up to 80 kW/cm2. With the technology uses in this product series, Gentec-EO has the capability to design custom products that measure much higher laser power levels than 15 kW if needed.

Easy and convenient to use

The user simply needs to connect its QB or QBH fiber output and adapted water lines and is ready to measure. There are 2 outputs on this product: DB15 and USB. The DB15 cable allows to view the measurements on your Gentec-EO display device, such as a MIRO ALTITUDE. Using the USB connection with a PC, the user can view and acquire data, or integrate the signal in a control feedback loop.

Gentec-EO's high-accuracy laser beam measurement instruments help engineers, scientists and technicians in all sorts of laser applications from the factory to the hospital, laboratory and research center. Learn about our solutions for these measurement types:

- Laser power meters

- Laser energy meters

- Laser beam profilers

- Terahertz power meters

This detector series is less sensitive to variations in water cooling temperature than any other high power water-cooled meter on the market, which provides a stable reading.

A wireless connection option is also available with these detectors, so the high power room can be closed and to use less cables for safer measurements. Check out Gentec-EO’s BLU award-winning technology if you are interested in this.

Gentec-EO provides serial commands and application support for seamless integration with the customer’s laser application.

The HP60A-15KW-GD-QBH generates zero back reflection to your environment and negligible back reflections to the fiber output connected to the detector thanks to the gold cone absorber design inside of it.

Available now

The HP60A-15KW-GD-QBH is available to order now. For more information contact a Gentec-EO local sales representative or visit our product page.

Gentec-EO

Gentec Electro-Optics is specialized in laser beam and terahertz source measurement and analysis. With an outstanding 50-year track record of innovation, developing and providing state-of the-art technologies to the laser market, Gentec-EO has become The Expert of the laser beam measurement field. For all sorts of laser applications from the factory to the hospital, laboratory and research center, Gentec-EO offers the broadest range of off-the-shelf and custom solutions, and stands ready to serve you now and in the future.

Gentec Electro-Optics in the Virtual Exhibition

Loading exhibition plan…

Visit our virtual exhibition!

News

News: MIRO ALTITUDE is a a laser power and energy display device with several new key features. More Information

Products

ProductEncDescription
beam dumpsS Ebeam dumps from Gentec Electro-Optics

The BD Series beam dumps are rugged and easy-to-use, simply plug the water-cooling and you’re ready to go! Like our high power HP Series, these beam dumps have a highly resistant absorber that can withstand 4 kW or even 12 kW in continuous mode. Their very large aperture of 100 mm in diameter accommodates even the largest beams.

beam profilersS Ebeam profilers from Gentec Electro-Optics

When it comes to characterizing a laser beam in the UV to near-IR range, a beam profiler is the go-to solution.

Thanks to its unique combination of high pixel density and large sensor size, the BEAMAGE series of laser beam diagnostics instruments has the double advantage of accurately characterising both very small beams of only a few tens of microns to larger beams of several millimeters in width, thus effectively covering most applications in one package.

The simple software is highly intuitive and yet includes many great functions, useful both for basic or advanced users. Furthermore, the calculations done by the software are ISO-compliant and give the user the most accurate beam characterization available, all this in a lightweight environment that doesn’t take days to fully master.

beam quality measurement devicesS Ebeam quality measurement devices from Gentec Electro-Optics

The BEAMAGE-M2 is an automated laser beam quality measurement system. It is the only M2 system on the market equipped with a complete set of 50-mm optics. Also, the sensor is 11.3 × 11.3 mm.

Two beam-steering mirrors are included for quick and easy alignment of your laser into the system. The internal mirrors are factory-aligned and the pre-set height also simplifies the alignment.

The low-profile ingenious mechanics make it easy to fit the device on any optical table.

The calculations are fully compliant to the ISO 11146 and 13694 standards.

Make a complete, ISO-compliant measurement in only 20 seconds with the ROI feature, and in less than a minute with full-frame acquisition.

In the easy-to-navigate software, both automatic and manual settings are available, so data points can be added or removed even after an automatic scan is completed.

beam splittersS Ebeam splitters from Gentec Electro-Optics

Gentec Electro-Optics offers beam splitters used as optical attenuators for measurements on high-power laser beams.

camerasS Ecameras from Gentec Electro-Optics

Gentec Electro-Optics offers a variety of CMOS camera-based beam profilers, covering wavelength ranges from the ultraviolet to the infrared (with a phosphor coating). We also have a device for large laser beams, containing a fiber-optic taper.

See also our overview on laser beam diagnostics.

infrared detectorsS Einfrared detectors from Gentec Electro-Optics

Gentec Electro-Optics has pyroelectric thermal detectors with active areas from 1 to 9 mm diameter. They are suitable for room temperature operation with broad spectral response, high sensitivity and high speed (sub-nanosecond response times).

integrating spheresS Eintegrating spheres from Gentec Electro-Optics

Gentec Electro-Optics has integrating spheres for laser energy measurements and for power measurements. Instruments for up to 20 mJ energy or 9 W continuous-wave power are available, but also photodiode-based instruments with high sensitivity and speed.

laser beam characterization instrumentsS Elaser beam characterization instruments from Gentec Electro-Optics

Gentec Electro-Optics offers a variety of camera-based instruments. This includes compact laser beam profilers and more complex instruments for measuring M2 beam quality factor by automatically analyzing the beam propagation. Besides, we offer optical power meters and various accessories.

optical attenuatorsS Eoptical attenuators from Gentec Electro-Optics

Gentec Electro-Optics offers optical attenuators for measurements on high-power laser beams.

optical energy metersS Eoptical energy meters from Gentec Electro-Optics

Gentec Electro-Optics offers accurate optical energy meters. We have a variety of laser energy measurement heads, covering a wide range of pulse energies from sub-millimoules to 250 J. These can be combined with a great selection of displays and PC interfaces.

optical power metersS Eoptical power meters from Gentec Electro-Optics

Gentec Electro-Optics offers a variety of laser power meters, ranging from ultracompact photodiode-based devices for microwatt power levels to thermal detectors for powers up to 100 kW. We have a wide range of power measurement heads which can be combined with a great choice of displays and PC interfaces.

photodetectorsS Ephotodetectors from Gentec Electro-Optics

Gentec Electro-Optics offers a great range of power detectors based on silicon or germanium photodiodes for powers up to 750 mW.

photodiodesS Ephotodiodes from Gentec Electro-Optics

Gentec Electro-Optics offers a great range of power detectors based on silicon or germanium photodiodes for powers up to 750 mW.

position-sensitive detectorsS Eposition-sensitive detectors from Gentec Electro-Optics

Gentec Electro-Optics offers measurement systems for laser beam pointing based on large area pyroelectric quadrant detectors. The instruments respond to laser beams from the UV to the far IR and can be used even in the terahertz region. Versions for pulsed sources, CW and high repetition rate (quasi-CW) operation are available.

pyroelectric detectorsS Epyroelectric detectors from Gentec Electro-Optics

Gentec Electro-Optics offers a selection of pyroelectric measurement heads for measuring high-energy laser pulses with up to 3.9 J, and various compatible displays and PC interfaces. There are also pyroelectric power detectors. Discreate pyroelectric thermal detectors are also available.

terahertz detectorsS Eterahertz detectors from Gentec Electro-Optics

Gentec Electro-Optics has a range of pyroelectric-based terahertz measurement heads and terahertz powermeters as well as suitable displays and PC interfaces. Whether you prefer to get your measurement on a large touch screen color LCD display or on your computer through USB/RS-232 connectivity, we have it all covered.

Information of Gentec Electro-Optics Appears on the Following Pages

Company profile (this page)

Pages with Suppliers for Products

beam dumps, beam profilers, beam quality measurement devices, beam splitters, cameras, infrared detectors, integrating spheres, laser beam characterization instruments, optical attenuators, optical energy meters, optical power meters, photodetectors, photodiodes, position-sensitive detectors, pyroelectric detectors, terahertz detectors

Encyclopedia Articles

beam dumps, beam profilers, beam quality, beam splitters, cameras, infrared detectors, integrating spheres, laser beam characterization, optical attenuators, optical energy meters, optical power meters, photodetectors, photodiodes, position-sensitive detectors, pyroelectric detectors, terahertz detectors

Profiles of Other Suppliers

Gentec Electro-Optics is shown as alternative supplier on 449 pages of other suppliers offering the same kind of products without having an ad package.

Other Pages

The banner which is included in the ad package will randomly appear on various pages.

On various pages, a banner can randomly show up which displays a random selection of logos of suppliers with an ad package.