Buyer's Guide … the one with the Encyclopedia!

Supplier profile:

Gentec Electro-Optics

Partners for accuracy

Gentec Electro-Optics, Inc.
445 St-Jean-Baptiste, Suite 160
Quebec, QC
Canada G2E 5N7
Tel.:+1 418 651 8003
Fax:+1 418 651 1174
Website:web link www.gentec-eo.com
Social media:

Company Description

Gentec Electro-Optics has a long history in the laser measurement field. With a 40 year track record of innovation and providing quality solutions for laser power and energy measurement applications from the factory to the hospital and laboratory, Gentec-EO stands ready to serve you now and in the future.

Gentec Electro-Optics

Sponsoring

Gentec Electro-Optics is a Bronze sponsor of the RP Photonics Encyclopedia. We thank all encyclopedia sponsors for their support of this resource, which benefits the whole photonics community!

News

2024-02-06

New laser energy detector with aperture up to 195 mm for measuring extra-large beams

Quebec City, QC, Canada, February 2024 - Gentec-EO, a provider of laser output measurement solutions, launches a new laser energy measurement solution to accommodate extra wide beams.

The new QE195LP-S-MB features an effective aperture of 195 mm. This new model of pyroelectric laser energy detector of the QE series is now the largest in the series and can measure every pulse at up to 200 Hz and up to 700 J. With a noise level as low as 0.1 mJ, this detector can be useful in a wide range of experiments.

Gentec-EO also recently added a 145 mm aperture model to the series that can measure up to 385 J.

These new measurement instruments were designed to meet the needs of laser scientists and engineers in industries such as high-energy laser science, advanced materials research and processing, energy production, and fusion research.

With these new solutions, Gentec Electro-Optics reaffirms its commitment to supporting the always-evolving laser industry.

Custom-built solution

The QE195LP-S-MB is a custom-built laser energy detector. Therefore, it can be customized to meet any specific requirements customers have.

Precise, traceable calibration

All detectors in the QE series come with a NIST-traceable calibration for their entire calibrated spectral range. This ensures that the measurements taken by the instruments are reliable and accurate, allowing customers to make valid comparisons with measurements taken by other instruments inside and outside their organization over time.

Order now

The QE195LP-S-MB detector is available for order now. For more information contact a Gentec-EO local sales representative or visit the product page.

News

2024-02-06

IS50A-1KW-RMT: The world's first energy detector for lasers up to 1 kW of average power

Quebec City, QC, Canada, February 2024 - Gentec-EO, a provider of laser output measurement solutions, launches a new high-power joulemeter for laser energy measurement up to 1 kW average power.

The IS50A-1KW-RMT is the highest-power joulemeter on the market. With this innovation, Gentec Electro-Optics reaffirms its commitment to supporting the always-evolving laser industry.

Designed to meet the requirements of high average power laser users in optics laboratories, material research, optics manufacturing, the medical industry, the semiconductor industry, and the aerospace industry, the IS50A-1KW-RMT series fills the gap when it comes to laser beam measurement of high-power, pulsed lasers.

Resistant coating

Gentec-EO's proprietary coating is engineered for strength. Its damage thresholds of 5 kW/cm² and 400 mJ/cm² are orders of magnitude higher than those of any other "white" coatings on the market.

Output that fits with the user’s work environment

With four output options, users can read the measurements either on their computer or with a tabletop display device:

1. Smart DB15 connector containing all the calibration data

2. INTEGRA with USB output (-INT)

3. INTEGRA with RS-232 output (-IDR)

4. INTEGRA with USB output and external trigger (-INE)

Precise, traceable calibration

The IS50A-1KW-RMT detectors have a NIST-traceable calibration for their entire calibrated spectral range. This ensures that the measurements taken by the instruments are reliable and accurate, allowing customers to make valid comparisons with measurements taken by other instruments inside and outside their organization over time.

Available now

The IS50A-1KW-RMT is custom-built, and tailored to your measurement needs. It is available for order now. For more information contact a Gentec-EO local sales representative or visit the product page.

Gentec Electro-Optics in the Virtual Exhibition

Loading exhibition plan…

Visit our virtual exhibition!

News

MIRO ALTITUDE is a a laser power and energy display device with several new key features.

IS50A-1KW-RMT: The world's first energy detector for lasers up to 1 kW of average power

Products

Product categoryEncDescription
beam dumpsS Ebeam dumps from Gentec Electro-Optics

The BD Series beam dumps are rugged and easy-to-use, simply plug the water-cooling and you’re ready to go! Like our high power HP Series, these beam dumps have a highly resistant absorber that can withstand 4 kW or even 12 kW in continuous mode. Their very large aperture of 100 mm in diameter accommodates even the largest beams.

beam profilersS Ebeam profilers from Gentec Electro-Optics

When it comes to characterizing a laser beam in the UV to near-IR range, a beam profiler is the go-to solution.

Thanks to its unique combination of high pixel density and large sensor size, the BEAMAGE series of laser beam diagnostics instruments has the double advantage of accurately characterising both very small beams of only a few tens of microns to larger beams of several millimeters in width, thus effectively covering most applications in one package.

The simple software is highly intuitive and yet includes many great functions, useful both for basic or advanced users. Furthermore, the calculations done by the software are ISO-compliant and give the user the most accurate beam characterization available, all this in a lightweight environment that doesn’t take days to fully master.

beam quality measurement devicesS Ebeam quality measurement devices from Gentec Electro-Optics

The BEAMAGE-M2 is an automated laser beam quality measurement system. It is the only M2 system on the market equipped with a complete set of 50-mm optics. Also, the sensor is 11.3 × 11.3 mm.

Two beam-steering mirrors are included for quick and easy alignment of your laser into the system. The internal mirrors are factory-aligned and the pre-set height also simplifies the alignment.

The low-profile ingenious mechanics make it easy to fit the device on any optical table.

The calculations are fully compliant to the ISO 11146 and 13694 standards.

Make a complete, ISO-compliant measurement in only 20 seconds with the ROI feature, and in less than a minute with full-frame acquisition.

In the easy-to-navigate software, both automatic and manual settings are available, so data points can be added or removed even after an automatic scan is completed.

beam splittersS Ebeam splitters from Gentec Electro-Optics

Gentec Electro-Optics offers beam splitters used as optical attenuators for measurements on high-power laser beams.

camerasS Ecameras from Gentec Electro-Optics

Gentec Electro-Optics offers a variety of CMOS camera-based beam profilers, covering wavelength ranges from the ultraviolet to the infrared (with a phosphor coating). We also have a device for large laser beams, containing a fiber-optic taper.

See also our overview on laser beam diagnostics.

infrared detectorsS Einfrared detectors from Gentec Electro-Optics

Gentec Electro-Optics has pyroelectric thermal detectors with active areas from 1 to 9 mm diameter. They are suitable for room temperature operation with broad spectral response, high sensitivity and high speed (sub-nanosecond response times).

integrating spheresS Eintegrating spheres from Gentec Electro-Optics

Gentec Electro-Optics has integrating spheres for laser energy measurements and for power measurements. Instruments for up to 20 mJ energy or 9 W continuous-wave power are available, but also photodiode-based instruments with high sensitivity and speed.

laser beam characterization instrumentsS Elaser beam characterization instruments from Gentec Electro-Optics

Gentec Electro-Optics offers a variety of camera-based instruments. This includes compact laser beam profilers and more complex instruments for measuring M2 beam quality factor by automatically analyzing the beam propagation. Besides, we offer optical power meters and various accessories.

optical attenuatorsS Eoptical attenuators from Gentec Electro-Optics

Gentec Electro-Optics offers optical attenuators for measurements on high-power laser beams.

optical energy metersS Eoptical energy meters from Gentec Electro-Optics

Gentec Electro-Optics offers accurate optical energy meters. We have a variety of laser energy measurement heads, covering a wide range of pulse energies from sub-millijoules to 250 J. These can be combined with a great selection of displays and PC interfaces.

optical power metersS Eoptical power meters from Gentec Electro-Optics

Gentec Electro-Optics offers a variety of laser power meters, ranging from ultracompact photodiode-based devices for microwatt power levels to thermal detectors for powers up to 100 kW. We have a wide range of power measurement heads which can be combined with a great choice of displays and PC interfaces.

photodetectorsS Ephotodetectors from Gentec Electro-Optics

Gentec Electro-Optics offers a great range of power detectors based on silicon or germanium photodiodes for powers up to 750 mW.

photodiodesS Ephotodiodes from Gentec Electro-Optics

Gentec Electro-Optics offers a great range of power detectors based on silicon or germanium photodiodes for powers up to 750 mW.

position-sensitive detectorsS Eposition-sensitive detectors from Gentec Electro-Optics

Gentec Electro-Optics offers measurement systems for laser beam pointing based on large area pyroelectric quadrant detectors. The instruments respond to laser beams from the UV to the far IR and can be used even in the terahertz region. Versions for pulsed sources, CW and high repetition rate (quasi-CW) operation are available.

pyroelectric detectorsS Epyroelectric detectors from Gentec Electro-Optics

Gentec Electro-Optics offers a selection of pyroelectric measurement heads for measuring high-energy laser pulses with up to 3.9 J, and various compatible displays and PC interfaces. There are also pyroelectric power detectors. Discrete pyroelectric thermal detectors are also available.

terahertz detectorsS Eterahertz detectors from Gentec Electro-Optics

Gentec Electro-Optics has a range of pyroelectric-based terahertz measurement heads and terahertz powermeters as well as suitable displays and PC interfaces. Whether you prefer to get your measurement on a large touch screen color LCD display or on your computer through USB/RS-232 connectivity, we have it all covered.

Information of Gentec Electro-Optics Appears on the Following Pages

Company profile (this page)

Pages with Suppliers for Products

beam dumps, beam profilers, beam quality measurement devices, beam splitters, cameras, infrared detectors, integrating spheres, laser beam characterization instruments, optical attenuators, optical energy meters, optical power meters, photodetectors, photodiodes, position-sensitive detectors, pyroelectric detectors, terahertz detectors

Encyclopedia Articles

beam dumps, beam profilers, beam quality, beam splitters, cameras, infrared detectors, integrating spheres, laser beam characterization, optical attenuators, optical energy meters, optical power meters, photodetectors, photodiodes, position-sensitive detectors, pyroelectric detectors, terahertz detectors

Profiles of Other Suppliers

Gentec Electro-Optics is shown as alternative supplier on 478 pages of other suppliers offering the same kind of products without having an advertising package.

Other Pages

The banner which is included in the advertising package will randomly appear on various pages.

On various pages, a banner can randomly show up which displays a random selection of logos of suppliers with an advertising package.