LIOS Technology

LIOS Technology
Schanzenstr. 39
Building D9-D13
51063 Köln
Germany

Tel.:	+49 221 99 88 70
Fax:	+49 221 99 88 71 50
E-mail:
Website:	www.lios-tech.com

LIOS Technology in the Virtual Exhibition

Loading exhibition plan…

Visit our virtual exhibition!

Products

Product Category	See	Alternative Suppliers having our advertising package, publishing product information
fiber cables	S E	art photonics, DK Photonics, Fibercore, GLOphotonics, Schäfter + Kirchhoff, Technica Optical Components, TOPTICA Photonics
fiber optics	S E	AMS Technologies, art photonics, CSRayzer Optical Technology, Diamond SA, Edmund Optics, Exail, Fibercore, GLOphotonics, Guiding Photonics, Le Verre Fluore, NKT Photonics, NYFORS, Schäfter + Kirchhoff, Sylex
fiber-optic sensors	S E	Diamond SA, HBK FiberSensing, Le Verre Fluore, Sylex, Technica Optical Components
fibers	S E	AMS Technologies, Cycle, Exail, Fibercore, GLOphotonics, Le Verre Fluore, NKT Photonics, Schäfter + Kirchhoff, TOPTICA Photonics
laser spectroscopy equipment	S E	HighFinesse, Sacher Lasertechnik, TOPTICA Photonics
optical sensors	S E	HBK FiberSensing, Sylex, Technica Optical Components
Raman spectroscopy equipment	S E	Active Fiber Systems, APE, CNI Laser, Headwall Photonics, Sacher Lasertechnik, Thorlabs, TOPTICA Photonics, Zolix

Column "To": S = list of suppliers for that product, E = encyclopedia article.

Third column: alternative suppliers are suppliers also offering such products while having an ad package. On their own company profile pages, the right column of the table contains their product descriptions instead of alternative suppliers.

Laser Design Services

The quality of a laser product is largely determined by its design and not just by the used parts.

Developing a good design requires a high technical competence and experience. Dr. Paschotta from RP Photonics offers can greatly help by

analyzing and amending our design goals, and working out complete design specifications
identifying the best suited technology (e.g. bulk or fiber laser)
working out a solid design, often based on numerical modeling
identifying possible problems early on, which allows for efficient solutions
giving you further advice as needed when you test your prototypes

Note: With a trial-and-error approach you may waste a lot of time and resources. (Also consider time to market!) Therefore, competent help is the key for cost-efficient and lower-risk developments.

You may also involve us only if you got into trouble, but coming earlier is usually better.