RP Photonics

Encyclopedia … combined with a great Buyer's Guide!

VLib
Virtual
Library

Mode Size Converters

Definition: optical devices which allow for efficient coupling between modes of different sizes

Categories: fiber optics and waveguides, photonic devices

How to cite the article; suggest additional literature

A mode size converter (or mode size adapter) is an optical device which can be used for expanding or contracting a mode in the transverse spatial dimensions. For example, a mode converter could expand the very tiny mode of the waveguide in a laser diode to a size which fits to the mode of an optical fiber. Here, the effective mode area may be increased from the order of 1 μm2 to roughly 100 μm2, as is appropriate for a usual single-mode fiber. This allows one to efficiently couple light from the laser diode into the fiber. Particularly for single-mode waveguides, efficient coupling is possible only when the mode radii of the two waveguides are approximately equal. (The article on fiber joints contains a formula for estimating the minimum coupling loss.) Note also that one requires not only compatible dimensions and shapes of the intensity profiles, but also compatible wavefronts – for example, plane wavefronts at the input of a single-mode fiber.

In principle, a mode size converter may simply be made of a single optical lens. Here, the light exiting the first waveguide first expands in free space, and then it is refocused to a spot with appropriate size by the lens. The input of the second waveguide is placed at that beam focus.

In many situations, however, it is desirable to avoid any free-space propagation and also to obtain a monolithic and more compact solution. Therefore, other technical approaches for mode size converters are often used. A particularly often used type of device is a tapered waveguide (→ tapered fibers). Here, the transverse dimensions of the waveguide and thus the local mode area vary smoothly. If the mode size varies sufficiently slowly within the waveguide, the mode can adiabatically adjust its parameters, so that it is everywhere close to the mode size calculated for a waveguide with constant transverse dimensions according to the considered position. However, non-adiabatic mode conversion is also possible with appropriately designed mode converters. This can lead to still more compact solutions. Very different kinds of non-adiabatic mode converters have been developed, often not at all based on tapered waveguides. For example, some nanotechnology devices exploit surface plasmons.

See also: modes, effective mode area, mode radius, fibers, fiber joints, tapered fibers, waveguides
and other articles in the categories fiber optics and waveguides, photonic devices

How do you rate this article?

Click here to send us your feedback!

Your general impression: don't know poor satisfactory good excellent
Technical quality: don't know poor satisfactory good excellent
Usefulness: don't know poor satisfactory good excellent
Readability: don't know poor satisfactory good excellent
Comments:

Found any errors? Suggestions for improvements? Do you know a better web page on this topic?

Spam protection: (enter the value of 5 + 8 in this field!)

If you want a response, you may leave your e-mail address in the comments field, or directly send an e-mail.

If you enter any personal data, this implies that you agree with storing it; we will use it only for the purpose of improving our website and possibly giving you a response; see also our declaration of data privacy.

If you like our website, you may also want to get our newsletters!

If you like this article, share it with your friends and colleagues, e.g. via social media:

arrow