Software … powerful tools for your research & development!

RP Fiber Power — Simulation and Design Software for Fiber Optics, Amplifiers and Fiber Lasers

Here, you can find a number of video demos, detailed case studies, and various nice graphics made with the software.

Case Studies Video Demos Nice Graphics

Some Nice Graphics

The following graphics, including some animated ones, have all been produced with the RP Fiber Power software only, i.e., not using any additional graphics software.

intensity profiles of fiber modes
Figure 1: Intensity profiles of all guided modes of a fiber.
intensity profiles at the end of a multimode fiber
Figure 2: Intensity profile at the end of a multimode fiber for varying position of the input laser beam.
fiber modes for varying refractive index profile
Figure 3: Amplitude profiles of fiber modes for a varying refractive index profile.
effective refractive index of fiber modes
Figure 4: Effective refractive indices of a germanosilicate fiber as functions of the wavelength.
amplitude distribution along the fiber
Figure 5: Amplitude distribution in a tapered fiber, where the LP11 mode does not “survive” the taper region.
amplitude distribution in the fiber coupler
Figure 6: Amplitude distribution in a fiber coupler.
ASE in fiber amplifier
Figure 7: Signal and pump power and ASE in a fiber amplifier.
supercontinuum generation
Figure 8: Spectrogram for supercontinuum generation in a single-mode fiber.

If you have any further questions or need a quotation: Contact us