die Firma … kompetent und hilfreich

Wissenschaftliche Publikationen

Dr. Paschotta, der Gründer von RP Photonics, war ursprünglich als Forscher tätig. Während seiner Zeit in der universitären Forschung veröffentlichte er über 100 wissenschaftliche Artikel in wissenschaftlichen Zeitschriften. Sie finden die Publikationsliste als Teil des Lebenslaufes.

Seit er RP Photonics gegründet hat, findet Dr. Paschotta natürlich weniger Zeit für wissenschaftliche Forschung. Trotzdem unterhält er weiterhin substanzielle wissenschaftliche Aktivitäten, die zu diversen Publikationen führen:

Zeitschriftenartikel

  • R. Paschotta, “Beam quality deterioration of lasers caused by intracavity beam distortions”, Opt. Express 14 (13), 6069 (2006)
  • R. Paschotta, “Cooperative luminescence and absorption in ytterbium-doped silica fiber and the fiber nonlinear transmission coefficient at λ = 980 nm with a regard to the ytterbium ion-pair's effect: Comment”, Opt. Express 14 (15), 6981 (2006)
  • R. Paschotta, Comment on “Passively Q-switched fiber laser that uses saturable Raman gain”, Opt. Lett. 31 (18), 2737 (2006)
  • A. Schlatter, S. Zeller, R. Paschotta, and U. Keller, “Simultaneous measurement of the phase noise on all optical modes of a mode-locked laser”, Appl. Phys. B 88, 385 (2007)
  • R. Paschotta, J. Speiser, and A. Giesen, “Comment on 'Surface loss limit of the power scaling of a thin-disk laser'”, J. Opt. Soc. Am. B 24 (10), 2658 (2007)
  • R. Paschotta, “Power scalability as a precise concept for the evaluation of laser architectures”, arXiv:0711.3987v1, http://www.arxiv.org/abs/0711.3987 (2007)
  • O. Prochnow, R. Paschotta, E. Benkler, U. Morgner, J. Neumann, D. Wandt, and D. Kracht, “Quantum-limited noise performance of a femtosecond all-fiber ytterbium laser”, Opt. Express 17 (18), 15525 (2009)
  • R. Paschotta, “Modeling of ultrashort pulse amplification with gain saturation”, Opt. Express 25 (16), 19112 (2017)

(Viele ältere Artikel finden Sie im Lebenslauf; es sind insgesamt über 100.)

Konferenzvorträge und Posterpräsentationen

  • R. Paschotta, “Explanation for beam quality deterioration of lasers for operation near frequency degeneracy of transverse cavity modes”, Advanced Solid-State Photonics 2006 in Lake Tahoe, poster TuB18
  • R. Paschotta, “Novel guidelines for the optimization of laser beam quality”, EPS Europhoton Conference 2006 in Pisa (Italy), talk FrB2
  • R. Paschotta, “Power scalability as a precise concept for the evaluation of laser architectures”, CLEO/Europe 2007 in Munich, talk CA3-2-MON, June 18, 2007
  • R. Paschotta, O. Prochnow, D. Wandt, U. Morgner, and D. Kracht, “Timing jitter of mode-locked fiber lasers”, Advanced Solid-State Photonics 2009 in Denver, poster MB16

(Viele ältere Vorträge finden Sie im Lebenslauf.)

Siehe auch die vielen short courses bei wissenschaftlichen Konferenzen, die Dr. Paschotta durchführt.

Bücher

  • Ein sehr umfangreiches Publikationsprojekt, welches seit dem Herbst 2004 andauert, ist die RP Photonics Encyclopedia (ursprünglich Encyclopedia of Laser Physics and Technology), die im Herbst 2008 bei Wiley-VCH als Buch in zwei Bänden herausgekommen ist.
  • RP Photonics hat SPIE Field Guides über Laser, Pulserzeugung und Fasertechnologie veröffentlicht.

Andere technische Publikationen

Es gibt ebenfalls diverse Artikel über technische und wissenschaftliche Aspekte in Industriejournalen — siehe die Seite über andere Artikel.

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

Spam check:

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.