Where to Buy Solid-state Lasers

Lumibird nanosecond Q-switched Nd:YAG lasers are well known for their ruggedness and versatility. From 5 mJ to 2.3 J at 1064 nm, from single pulse to 400 Hz, they can be diode-pumped (compactness, ease of use) or flashlamp-pumped (high energy), and are available at 532 nm, 355 nm, 266 nm and 1.5 µm. Double pulse models are also proposed for applications in fluid mechanics (PIV).

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 5645)!

Frankfurt Laser Company offers a wide range of diode-pumped solid state laser products, including the smallest DPSS laser heads, low cost modules, low power and high power laser systems and high quality single longitudinal mode laser systems with different power output and wavelengths.

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 2227)!

Edmund Optics offers a wide range of diode laser sources, including machine vision lasers, life science lasers, metrology lasers, industrial and point lasers, and material processing lasers.

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 1139)!

CNI offers a wide range of all-solid-state lasers not only concerning wavelengths, but also in terms of features, including single frequency lasers, narrow linewidth lasers, low noise lasers, high power and high energy lasers, mode-locked picosecond lasers and Q-switched lasers.

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 1355)!

Bright Solutions offers a range of diode-pumped solid-state lasers, including

• Wedge – nanosecond Q-switched lasers for 266, 355, 532, 1064, 1570, 3100 nm (also multi-wavelength configurations), used e.g. for atmospheric LIDAR, monitoring, glass machining or lithography
• Onda – compact monolithic nanosecond Q-switched lasers for 266, 355, 532 or 1064 nm, used e.g. for lens marking, plastic marking or intravolume glass marking
• Sol – compact Q-switched lasers for 355, 532 or 1064 nm, up to 200 kHz, used e.g. for automotive fabrication, electronic machining, ID card writing and other industrial applications
• Vento – sub-nanosecond MOPA lasers with pulse durations down to 500 ps, up to 200 kHz, up to 100 W average power at 1064 nm or 50 W at 532 nm, e.g. for LIDAR or PCB microprocessing
• Aero – high energy lasers with up to 200 mJ at 1064 nm, 100 mJ at 532 nm, multi-wavelength configurations, custom beam shaping, application e.g. in atmospheric LIDAR, LIBS or nonlinear spectroscopy
• BDL and BFD – fiber-coupled diode laser modules with up to 200 W cw (or 400 W quasi-cw) in a 200-μm core fiber, e.g. for pumping of solid-state and fiber lasers, material processing or illumination; pulsed models are available
• NPS – narrowband picosecond lasers for applications like OPO pumping, Raman or fluorescence spectroscopy and multimodal imaging
• ONE DPSS – miniaturized Q-switched lasers with up to 200 μJ and down to 3 ns, e.g. for atmospheric LIDAR and laser marking on plastics

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 1940)!

RPMC Lasers offers one of the widest selections of pulsed and CW diode-pumped solid-state lasers, ranging from the UV through the MWIR regimes. Our product offerings include continuous-wave (CW) and pulsed DPSS lasers, fiber lasers, ultrafast lasers, microchip lasers, tunable lasers, MIL-spec lasers, and CW DPSS laser modules, with a wide range of output powers, pulse widths, and pulse repetition rates. Applications include material processing, LIDAR, micromachining, and many others!

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booths 1940, 1941, 1948, 1949)!

Lasers from Teem Photonics are all air-cooled diode-pumped solid-state lasers, which are passively Q-switched to generate sub-nanosecond pulses, and in some cases combined with a fiber amplifier. Due to nonlinear frequency converters, available emission wavelengths are 1535 nm, 1064 nm, 532 nm, 355 nm, 266 nm and 213 nm.

MegaWatt Lasers Inc. offers CTH:YAG and Er:YAG resonators. These are flash lamp pumped and water cooled. They are optimized for energy and repetition rate. The CTH:YAG resonator is able to generate 4-J pulses at a repetition rate of 10 Hz, while the Er:YAG resonator reaches 3 J at also 10 Hz. Both allow for adjustable pulse widths.

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 3609)!

The Stuttgart Instruments Primus is an ultrafast (fs) mode-locked oscillator, based on the solid-state technology. It provides a high average output power combined with a superior low noise level (shot noise limit above 300 kHz) and an excellent long-term stability.

The solid-state technology with 1040 nm central wavelength enables the excellent long-term stability by providing several watts of output power at 40 MHz pulse repetition rate and 450 fs pulse duration. Its superior low noise level reaches the shot noise limit above 300 kHz. In combination with the stability and output power, it enables ultrasensitive measurements and makes the Primus perfectly suited as pump source for frequency converters like the Stuttgart Instruments Alpha. The entire system is encapsulated in a solid CNC-cut and water-cooled housing, thus reaching excellent robustness against external perturbations.

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 3653)!

Radiantis broadly tunable lasers are based on solid-state technology. Femtosecond and picosecond pulses as well as continuous-wave (CW) temporal regimes are provided with automatic tuning across the UV, visible and IR.

Our port­folio of diode-pumped solid state (DPSS) lasers with wavelengths from 213 to 1960 nm includes CW and pulsed systems, frequency-doubled (532 nm) or frequency-tripled (355 nm) models, and Q-switched DPSS lasers:

• actively Q-switched DPSS lasers, short-pulse output, single shot to >50 kHz, very low jitter
• DPSS lasers emitting very short laser pulses, 4 VIS wavelengths pulse-to-pulse switchable for multispectral photoacoustic imaging
• ultra-compact sub-nanosecond lasers
• high-output-power sealed sub-nanosecond lasers
• high-performance triggered and narrow-linewidth sub-nanosecond lasers
• high-peak-power, “hundreds of ps pulse” lasers
• very-high-output-power amplified lasers with down to 100 ps pulses
• very-high-peak and output power, “hundreds of ps pulse” amplified lasers
• customized DPSS laser systems, tailored to your requirements

HÜBNER Photonics offer diode-pumped solid state lasers in the Cobolt 04-01, 05-01 and 08-01 Series, as well as the Cobolt Skyra and C-WAVE. All our lasers are high performance with excellent wavelength stability and accuracy as well as power stability and very low noise.

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 3567)!

EKSPLA offers a wide range of femtosecond, picosecond and nanosecond lasers as well as tunable wavelength systems for research and industrial applications.

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 1527)!

GWU-Lasertechnik provides all-solid-state tunable laser solutions. We have more than 30 years of experience in lasers, non-linear optics and manufacturing. The sophisticated optical and mechanical design of our devices ensure excellent performance, highest reliability and longest lifetime. Our rugged all-solid-state Laser technology does not require any consumable supplies and is thus providing most convenient usability, longest lifetime and excellent total costs of ownership. GWU’s widely tunable laser sources cover the spectral range from the deep-UV at <190 nm to the IR at >2700 nm continuously to serve even most demanding applications in science and industry.

See us at SPIE Photonics 2024 in San Francisco, January 30 – February 1 (booth 4205)!

APS’ various DPSS laser systems offer many advantages to traditional lasers including low power consumption, minimal heat generation, compact packaging, and reliability that meets the needs of today’s manufacturing processes.